{ "id": "epbh46sbe8", "slug": "equivalent-circuit-model", "title": "Equivalent circuit model", "updated": "2026-10-15", "topic_path": [ { "id": "technology", "label": "Technology and the built world", "api_url": "https://www.edgepedia.org/api/v1/topics/technology" }, { "id": "technology.engineering", "label": "Engineering and manufacturing", "api_url": "https://www.edgepedia.org/api/v1/topics/technology.engineering" }, { "id": "technology.engineering.engineering.electrical.electronics", "label": "Electrical and electronics engineering", "api_url": "https://www.edgepedia.org/api/v1/topics/technology.engineering.engineering.electrical.electronics" }, { "id": "technology.engineering.engineering.electrical.electronics.circuits-and-signal-processing", "label": "Circuits and signal processing", "api_url": "https://www.edgepedia.org/api/v1/topics/technology.engineering.engineering.electrical.electronics.circuits-and-signal-processing" } ], "geo": [ { "id": "geo.nongeo.t1800.technology.engineering.engineering.electrical.electronics", "label": "Non-geographic · 1800 to 1945: Electrical and electronics engineering", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1800.technology.engineering.engineering.electrical.electronics", "path": [ { "id": "geo.nongeo", "label": "Non-geographic", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo" }, { "id": "geo.nongeo.t1800", "label": "Non-geographic · 1800 to 1945", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1800" }, { "id": "geo.nongeo.t1800.technology", "label": "Technology and the built world", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1800.technology" }, { "id": "geo.nongeo.t1800.technology.engineering", "label": "Engineering and manufacturing", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1800.technology.engineering" }, { "id": "geo.nongeo.t1800.technology.engineering.engineering.electrical.electronics", "label": "Electrical and electronics engineering", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1800.technology.engineering.engineering.electrical.electronics" } ] }, { "id": "geo.nongeo.t1946.technology.engineering.engineering.electrical.electronics", "label": "Non-geographic · 1946 to 2000: Electrical and electronics engineering", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.technology.engineering.engineering.electrical.electronics", "path": [ { "id": "geo.nongeo", "label": "Non-geographic", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo" }, { "id": "geo.nongeo.t1946", "label": "Non-geographic · 1946 to 2000", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946" }, { "id": "geo.nongeo.t1946.technology", "label": "Technology and the built world", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.technology" }, { "id": "geo.nongeo.t1946.technology.engineering", "label": "Engineering and manufacturing", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.technology.engineering" }, { "id": "geo.nongeo.t1946.technology.engineering.engineering.electrical.electronics", "label": "Electrical and electronics engineering", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.technology.engineering.engineering.electrical.electronics" } ] } ], "excerpt": "An equivalent circuit model represents the electrical behavior of a real device, such as a battery, by a network of ideal resistors, capacitors, and inductors.", "snippet": "An equivalent circuit model represents the electrical behavior of a real device, such as a battery, by a network of ideal resistors, capacitors, and inductors.", "node": "technology.engineering.engineering.electrical.electronics.circuits-and-signal-processing", "markdown": "# Equivalent circuit model\n\nAn equivalent circuit model represents the electrical behavior of a real device, such as a battery cell or an electrochemical interface, by a network of ideal resistors, capacitors, inductors, and specialized elements: in electrochemical impedance spectroscopy the network's impedance is matched to the device's measured response over a frequency range, while a battery equivalent circuit model instead describes terminal voltage and current dynamics, typically including an open-circuit-voltage source, and may be parameterized using EIS or other tests. It remains by far the most popular analysis technique for impedance spectroscopy[1](https://research-portal.uu.nl/ws/portalfiles/portal/232289539/PIIS235271102400178X.pdf), and collections of ideal elements can be combined in series and in parallel to build what is termed an equivalent circuit model.[2](https://www.metrohm.com/content/dam/metrohm/shared/documents/application-notes/an-e/AN-EIS-003.pdf)\n\n| Key fact | Detail |\n|---|---|\n| Standard circuit | The Randles circuit (solution resistance, double-layer capacitor or CPE, charge-transfer resistance, optionally a Warburg element) is the standard starting point.[3](https://www.metrohm.com/content/dam/metrohm/shared/documents/application-notes/an-e/AN-EIS-004.pdf) |\n| Typical measurement | EIS with a small perturbation current over 0.01 Hz to 10 kHz for battery cells.[4](https://www.mdpi.com/2313-0105/10/11/400) |\n| Validation | The Kramers–Kronig relations are used to check that the data are consistent with a linear, time-invariant system.[5](https://www.nature.com/articles/s43586-021-00039-w) |\n| Fitting method | Complex nonlinear least squares, most often Levenberg–Marquardt or Simplex, judged by the chi-square (\\( \\chi^{2} \\)) value.[5](https://www.nature.com/articles/s43586-021-00039-w) • [6](https://my.biologic.net/documents/eis-equivalent-circuit-electrochemistry-battery-application-note-14/) • [7](https://pubs.acs.org/amachv/article/3/3/162/332763/Electrochemical-Impedance-Spectroscopy-amp-xe5f8-A) |\n| Main limitation | There is no singular correct circuit for a data set, and fitted element values rarely carry direct physical significance.[6](https://my.biologic.net/documents/eis-equivalent-circuit-electrochemistry-battery-application-note-14/) • [8](https://www.sciencedirect.com/science/article/abs/pii/S0013468611001289) |\n| Physics-based alternative | The Doyle–Fuller–Newman model has dominated battery continuum modeling since the early 1990s.[9](https://beta.iopscience.iop.org/article/10.1088/2516-1083/ac7d31) |\n\n## How it works\n\nThe principle is terminal-behavior equivalence. A real device is probed at its terminals, and a network of ideal elements is sought whose impedance matches the measurement over the tested frequency or time range. Each physical process in an electrochemical cell responds in a distinct frequency band, so elements can be assigned to processes: charge-transfer processes appear in the middle frequency range, typically 1 kHz to 10 mHz, as semicircular arcs in a [Nyquist plot](https://www.edgepedia.org/nyquist-plot), while diffusion dominates below that range with a 45° slope.[10](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154) A 45° diagonal line at low frequency is the signature of Warburg impedance.[11](https://www.gamry.com/assets/Application-Notes/Equivalent-Circuit-Modeling-in-EIS.pdf)\n\nThe mapping has a physical pedigree. Newman's porous electrode model can be transformed into an electric transmission line, and simplifications lead to the de Levie model and ultimately a Randles-like equivalent circuit per insertion electrode plus a pure electrolyte resistor.[12](https://www.sciencedirect.com/science/article/pii/S2451910321002313) The de Levie simplification accurately describes measured battery spectra from about 1 Hz to the highest measurable frequencies, but neglects diffusional processes in the electrolyte within pores and separator.[12](https://www.sciencedirect.com/science/article/pii/S2451910321002313)\n\n## How it is done\n\nThe workflow starts with an impedance measurement. For battery cells, a small perturbation current spanning 0.01 Hz to 10 kHz is injected and the voltage response recorded.[4](https://www.mdpi.com/2313-0105/10/11/400)\n\nValidation comes before fitting. The [Kramers–Kronig relations](https://www.edgepedia.org/kramers-kronig-relations) are used to check that the data are consistent with a linear, time-invariant system; in practice this is done by fitting a model of m series-connected Voigt elements, or by Boukamp's linear Kronig–Kramers transform test.[5](https://www.nature.com/articles/s43586-021-00039-w) • [13](https://doi.org/10.1149/1.2044210) • [14](https://doi.org/10.1149/1.2048479) The Z-HIT algorithm, also derived from the Kramers–Kronig relations, serves the same purpose in some software.[1](https://research-portal.uu.nl/ws/portalfiles/portal/232289539/PIIS235271102400178X.pdf)\n\nNext, a circuit topology is chosen. The distribution of relaxation times (DRT) method helps here: the high-intensity characteristic frequencies of the measured spectrum are used to derive the number of RC elements.[10](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154) DRTtools, introduced by Wan and colleagues in 2015 in Electrochimica Acta, implements radial basis functions for this deconvolution.[15](https://doi.org/10.1016/j.electacta.2015.09.097)\n\nFitting is then performed by complex nonlinear least squares, a technique applied to impedance data by Macdonald, Schoonman, and Lehnen in 1982 in the Journal of Electroanalytical Chemistry.[16](https://doi.org/10.1016/0022-0728%2882%2987062-9) Levenberg–Marquardt regression, which is sensitive to initial values but provides confidence intervals, is the standard algorithm[5](https://www.nature.com/articles/s43586-021-00039-w); EC-Lab's ZFit offers a choice of Simplex and Levenberg–Marquardt.[6](https://my.biologic.net/documents/eis-equivalent-circuit-electrochemistry-battery-application-note-14/) Seed values within a decade or two of the final values are needed for Levenberg–Marquardt to fit properly.[11](https://www.gamry.com/assets/Application-Notes/Equivalent-Circuit-Modeling-in-EIS.pdf) Fit quality is defined by the chi-square (\\( \\chi^{2} \\)) value.[7](https://pubs.acs.org/amachv/article/3/3/162/332763/Electrochemical-Impedance-Spectroscopy-amp-xe5f8-A)\n\n## Origin\n\n[17](https://jontallen.ece.illinois.edu/uploads/537.F18/Papers/DonJohnson1-03.pdf) Aimée Vaschy, initially skeptical, popularized the theorem in his 1890 Traité d'Électricité et de Magnétisme, associating Thévenin's name with it without mentioning Helmholtz.[17](https://jontallen.ece.illinois.edu/uploads/537.F18/Papers/DonJohnson1-03.pdf)\n\nIn electrochemistry, the Randles equivalent circuit is a theoretical analysis of Faraday impedance spectra.[18](https://chemistry-europe.onlinelibrary.wiley.com/doi/full/10.1002/elsa.202300005) Russian scientists Dolin and Erschler obtained similar results in 1940, but their Russian-language papers were not seen by the wider electrochemical community.[18](https://chemistry-europe.onlinelibrary.wiley.com/doi/full/10.1002/elsa.202300005) EIS gained wide attention for battery systems from the 1980s onward.[19](https://link.springer.com/article/10.1007/s10800-025-02273-6)\n\n## Variants\n\n**Randles circuit.** It includes a solution resistance, a double-layer capacitor, and a charge-transfer (polarization) resistance, and became the most frequently used theoretical treatment of impedance spectra.[18](https://chemistry-europe.onlinelibrary.wiley.com/doi/full/10.1002/elsa.202300005)\n\n**Battery ECM family.** Variants for lithium-ion batteries include Rint, Thevenin, PNGV, dual-polarization, high-order RC, Randles, and [fractional-order models](https://www.edgepedia.org/fractional-order-model), trading accuracy against complexity and real-time performance.[20](https://www.mdpi.com/2079-9292/15/9/1968) The Thevenin (first-order RC) model adds a parallel RC network to the Rint model and is the most commonly used ECM in engineering applications.[20](https://www.mdpi.com/2079-9292/15/9/1968)\n\n**Fractional-order models.** These replace the ideal capacitor with a constant phase element (CPE), giving higher fitting accuracy over wide frequency ranges but a computational burden significantly higher than ordinary differential equations.[20](https://www.mdpi.com/2079-9292/15/9/1968) The CPE exponent interpolates between ideal elements: 0.0 is an ideal resistor, 0.5 a Warburg element, 1.0 an ideal capacitor, and -1.0 an ideal inductor.[21](https://www.ivium.com/wp-content/uploads/2021/09/A4.3-EIS-Equivalent-circuit-fitting.pdf)\n\n**Topology equivalence.** Different circuits can exhibit identical impedance at all frequencies. Four two-resistor/two-capacitor circuits (ladder, Voigt, Maxwell) fit the same Nyquist diagram with nearly identical \\( \\chi^{2}/|Z| \\) of about 1.44 and are algebraically interconvertible.[6](https://my.biologic.net/documents/eis-equivalent-circuit-electrochemistry-battery-application-note-14/)\n\n## Applications\n\nIn battery management, simple circuits with a series resistor and at most two RC elements are ideal for low-dynamics simulations, while circuits with up to five RC elements or a CPE suit highly dynamic processes.[10](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154) The Randles model, containing charge-transfer resistance \\( R_{\\mathrm{p}} \\), double-layer capacitance \\( C_{\\mathrm{p}} \\), and Warburg impedance \\( Z_{\\mathrm{W}} \\), is suited to EIS fitting and electrode-kinetics studies rather than real-time BMS use.[20](https://www.mdpi.com/2079-9292/15/9/1968) Quantitative benchmarks support model selection: the 2 RCPE model achieves a lower average deviation of 2.4‰ and uses one third of the iterations needed by the 3 RCPE model[10](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154), and nonlinear least squares fitting with Monte-Carlo random initial guesses keeps parameter errors well below 5% at all tested noise levels.[4](https://www.mdpi.com/2313-0105/10/11/400)\n\n## Limitations and alternatives\n\n**Non-uniqueness.** For any set of EIS data there is no singular correct equivalent circuit[19](https://link.springer.com/article/10.1007/s10800-025-02273-6); several arrangements of elements are possible for a given data set, and some circuits are mathematically identical.[3](https://www.metrohm.com/content/dam/metrohm/shared/documents/application-notes/an-e/AN-EIS-004.pdf) A good fit therefore does not guarantee an accurate physical model.[22](https://www.gamry.com/assets/Application-Notes/basics-of-electrochemical-impedance-spectroscopy.pdf)\n\n**Unphysical parameters.** There is rarely direct physical significance to fitted element values, since parameters from different physical processes are coupled in complicated ways.[8](https://www.sciencedirect.com/science/article/abs/pii/S0013468611001289) As demonstrated by Fletcher, a good fit result cannot be taken as an indicator of the physical validity of the model structure, and the internal states, the node voltages, lack physical meaning.[23](https://iopscience.iop.org/article/10.1149/1945-7111/ad1ec7) Levenberg–Marquardt can exhibit parameter degeneracy, producing \\( C_{1} \\) values spanning [3.90, 422,611.05] kF versus physically plausible [0.10, 4.79] kF for trust-region.[24](https://www.nature.com/articles/s41598-026-55478-w)\n\n**Identifiability.** Near-identical time constants (\\( \\tau_{1} \\approx \\tau_{2} \\)) across multiple SOC levels confirm parameter degeneracy, as the algorithm assigns identical dynamics to both RC branches; the individual branch parameters become poorly identifiable, and for exactly equal time constants only the common time constant and the branches' combined resistance can be recovered from the response.[24](https://www.nature.com/articles/s41598-026-55478-w) By convention, a higher number of equivalent circuit elements causes no improved significance: using too many elements does not allow assignment of additional electrochemical processes.[10](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154) Practitioners are advised not to add elements until visible fit errors are eliminated, because elements with no chemical basis offer no practical information.[11](https://www.gamry.com/assets/Application-Notes/Equivalent-Circuit-Modeling-in-EIS.pdf)\n\n**Computational cost.** A 1-RC model is approximately twice as fast as a 2-RC model and more than three times faster than a 3-RC model; when the ECM contains more than two RC components, least-squares computation time increases to the point of infeasibility.[25](https://doi.org/10.3390/batteries12010037) • [4](https://www.mdpi.com/2313-0105/10/11/400)\n\n**Validity limits.** Because ECMs are entirely phenomenological, they cannot shed light on internal battery mechanisms, operate outside the regime in which they are parameterized, or be relied upon to predict long-term battery behavior.[9](https://beta.iopscience.iop.org/article/10.1088/2516-1083/ac7d31) [Temperature](https://www.edgepedia.org/temperature) most strongly influences ECM parameters: ohmic resistance \\( R_{0} \\) increases approximately linearly as temperature decreases, while charge-transfer and diffusion impedance increases exponentially.\n\n**Physics-based alternatives.** The Doyle–Fuller–Newman (DFN, also P2D or Newman) model has dominated battery continuum modeling since the early 1990s.[9](https://beta.iopscience.iop.org/article/10.1088/2516-1083/ac7d31) Detailed physics-based models predict at least 10 impedance features for a typical insertion cell, while measurements on realistic cells reveal only a couple of arcs or lines.[12](https://www.sciencedirect.com/science/article/pii/S2451910321002313) A physicochemical ECM combining equivalent circuits with DFN theory reproduces the DFN model's internal states, with a mean absolute voltage error never exceeding 4.2 mV and a speed three to thirty times faster than a reference p2D model depending on discretization.[23](https://iopscience.iop.org/article/10.1149/1945-7111/ad1ec7) No single model can study every aspect of lithium-ion batteries; different models address specific applications.[26](https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/adts.202401016)\n\n## References\n\n1. [DECiM: Determination of equivalent circuit models (Software, Hardware and Networks)](https://research-portal.uu.nl/ws/portalfiles/portal/232289539/PIIS235271102400178X.pdf)\n2. [Electrochemical Impedance (Metrohm Autolab Application Note EIS-003, circuit elements)](https://www.metrohm.com/content/dam/metrohm/shared/documents/application-notes/an-e/AN-EIS-003.pdf)\n3. [Metrohm Application Note AN-EIS-004: Equivalent circuit models (version 2, 2024-04)](https://www.metrohm.com/content/dam/metrohm/shared/documents/application-notes/an-e/AN-EIS-004.pdf)\n4. [A Comparison of Battery Equivalent Circuit Model Parameter Extraction Approaches Based on Electrochemical Impedance Spectroscopy (Batteries, MDPI)](https://www.mdpi.com/2313-0105/10/11/400)\n5. [Electrochemical impedance spectroscopy | Nature Reviews Methods Primers](https://www.nature.com/articles/s43586-021-00039-w)\n6. [ZFit and equivalent electrical circuits – Application Note 14 (BioLogic)](https://my.biologic.net/documents/eis-equivalent-circuit-electrochemistry-battery-application-note-14/)\n7. [Electrochemical Impedance Spectroscopy: A Tutorial (ACS Measurement Science Au)](https://pubs.acs.org/amachv/article/3/3/162/332763/Electrochemical-Impedance-Spectroscopy-amp-xe5f8-A)\n8. [Mechanism and equivalent circuits in electrochemical impedance spectroscopy (Electrochimica Acta)](https://www.sciencedirect.com/science/article/abs/pii/S0013468611001289)\n9. [A continuum of physics-based lithium-ion battery models reviewed (IOPscience)](https://beta.iopscience.iop.org/article/10.1088/2516-1083/ac7d31)\n10. [Analysis of Lithium-Ion Battery Models Based on Electrochemical Impedance Spectroscopy (Energy Technology, 2016)](https://onlinelibrary.wiley.com/doi/10.1002/ente.201600154)\n11. [Equivalent Circuit Modeling in EIS (Gamry Application Note)](https://www.gamry.com/assets/Application-Notes/Equivalent-Circuit-Modeling-in-EIS.pdf)\n12. [Impedance spectroscopy of battery cells: Theory versus experiment (review article)](https://www.sciencedirect.com/science/article/pii/S2451910321002313)\n13. [Bernard A. Boukamp (1995). A Linear Kronig‐Kramers Transform Test for Immittance Data Validation. Journal of The Electrochemical Society.](https://doi.org/10.1149/1.2044210)\n14. [Pankaj Agarwal, Mark E. Orazem, Luis H. Garcia‐Rubio (1995). Application of Measurement Models to Impedance Spectroscopy: III . Evaluation of Consistency with the Kramers‐Kronig Relations. Journal of The Electrochemical Society.](https://doi.org/10.1149/1.2048479)\n15. [Ting Hei Wan and colleagues (2015). Influence of the Discretization Methods on the Distribution of Relaxation Times Deconvolution: Implementing Radial Basis Functions with DRTtools. Electrochimica Acta.](https://doi.org/10.1016/j.electacta.2015.09.097)\n16. [Applicability and power of complex nonlinear least squares for the analysis of impedance and admittance data (Journal of Electroanalytical Chemistry, 1982)](https://doi.org/10.1016/0022-0728%2882%2987062-9)\n17. [Origins of the equivalent circuit concept: the voltage-source equivalent (Proceedings of the IEEE)](https://jontallen.ece.illinois.edu/uploads/537.F18/Papers/DonJohnson1-03.pdf)\n18. [Electrochemical contributions: John Edward Brough Randles (1912–1998)](https://chemistry-europe.onlinelibrary.wiley.com/doi/full/10.1002/elsa.202300005)\n19. [Electrochemical impedance spectroscopy and battery systems: past work, current research, and future opportunities (J Appl Electrochem, 2025)](https://link.springer.com/article/10.1007/s10800-025-02273-6)\n20. [Equivalent Circuit Models for Lithium-Ion Batteries: A Comprehensive Review (Electronics, MDPI)](https://www.mdpi.com/2079-9292/15/9/1968)\n21. [Application Note A4.3: EIS, Equivalent circuit fitting (Ivium Technologies)](https://www.ivium.com/wp-content/uploads/2021/09/A4.3-EIS-Equivalent-circuit-fitting.pdf)\n22. [Basics of Electrochemical Impedance Spectroscopy (Gamry Application Note)](https://www.gamry.com/assets/Application-Notes/basics-of-electrochemical-impedance-spectroscopy.pdf)\n23. [Development and Evaluation of a Physicochemical Equivalent Circuit Model for Lithium-Ion Batteries (J. Electrochem. Soc., 2024)](https://iopscience.iop.org/article/10.1149/1945-7111/ad1ec7)\n24. [Algorithm selection for lithium-ion battery ECM parameterization: trust-region, Levenberg-Marquardt, Gauss-Newton, and BFGS (Scientific Reports, 2026)](https://www.nature.com/articles/s41598-026-55478-w)\n25. [A Comprehensive Review of Equivalent Circuit Models and Neural Network Models for Battery Management Systems (via aggregator page)](https://doi.org/10.3390/batteries12010037)\n26. [A Comprehensive Review of the Pseudo-Two-Dimensional (P2D) Model (Advanced Theory and Simulations, Wiley, 2025)](https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/adts.202401016)\n\n---\n*Topic: Encyclopedia › Technology and the built world › Engineering and manufacturing › Electrical and electronics engineering › Circuits and signal processing*\n\n*Initially written Sep 29, 2026 · Reviewed: Sep 30, 2026 · Edited: Oct 15, 2026 · Last review: Sep 30, 2026*\n\n*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*\n\nLicense: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license\n", "same_as": [], "url": "https://www.edgepedia.org/equivalent-circuit-model", "markdown_url": "https://www.edgepedia.org/equivalent-circuit-model.md", "license": { "name": "Edgepedia Community License 1.0", "url": "https://www.edgepedia.org/edgepedia/license", "summary": "Free with credit, commercial use included. AI training is open to everyone. For other uses, organizations over USD 100M in revenue or 100M monthly users license separately.", "spdx": "LicenseRef-Edgepedia-Community-1.0" }, "credit": "\"Equivalent circuit model\", Edgepedia (EdgeChat), https://www.edgepedia.org/equivalent-circuit-model. Edgepedia Community License 1.0.", "credit_md": "\"[Equivalent circuit model](https://www.edgepedia.org/equivalent-circuit-model)\", Edgepedia (EdgeChat), [https://www.edgepedia.org/equivalent-circuit-model](https://www.edgepedia.org/equivalent-circuit-model). [Edgepedia Community License 1.0](https://www.edgepedia.org/edgepedia/license).", "credit_html": "\"Equivalent circuit model\", Edgepedia (EdgeChat), https://www.edgepedia.org/equivalent-circuit-model. Edgepedia Community License 1.0.", "speakable": "An equivalent circuit model represents the electrical behavior of a real device, such as a battery, by a network of ideal resistors, capacitors, and inductors." }