{ "id": "ep4k0cjqtw", "slug": "polyol-method", "title": "Polyol method", "updated": "2026-10-15", "topic_path": [ { "id": "physical", "label": "Physical world and mathematics", "api_url": "https://www.edgepedia.org/api/v1/topics/physical" }, { "id": "physical.chemistry", "label": "Chemistry", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.chemistry" }, { "id": "physical.chemistry.methods", "label": "Chemical principles and methods", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.chemistry.methods" }, { "id": "physical.chemistry.methods.chemical-synthesis", "label": "Chemical synthesis", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.chemistry.methods.chemical-synthesis" }, { "id": "physical.chemistry.methods.chemical-synthesis.inorganic-organometallic-synthesis", "label": "Inorganic and organometallic synthesis", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.chemistry.methods.chemical-synthesis.inorganic-organometallic-synthesis" } ], "geo": [ { "id": "geo.nongeo.t1946.physical.chemistry.methods.chemical-synthesis", "label": "Non-geographic · 1946 to 2000: Chemical synthesis", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.chemistry.methods.chemical-synthesis", "path": [ { "id": "geo.nongeo", "label": "Non-geographic", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo" }, { "id": "geo.nongeo.t1946", "label": "Non-geographic · 1946 to 2000", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946" }, { "id": "geo.nongeo.t1946.physical", "label": "Physical world and mathematics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical" }, { "id": "geo.nongeo.t1946.physical.chemistry", "label": "Chemistry", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.chemistry" }, { "id": "geo.nongeo.t1946.physical.chemistry.methods", "label": "Chemical principles and methods", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.chemistry.methods" }, { "id": "geo.nongeo.t1946.physical.chemistry.methods.chemical-synthesis", "label": "Chemical synthesis", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.chemistry.methods.chemical-synthesis" } ] } ], "excerpt": "The polyol method, or polyol process, is a wet-chemical synthesis in which a heated polyol acts as solvent, reducing agent, and stabilizer, yielding metal and oxide nanoparticles.", "snippet": "The polyol method, or polyol process, is a wet-chemical synthesis in which a heated polyol acts as solvent, reducing agent, and stabilizer, yielding metal and oxide nanoparticles.", "node": "physical.chemistry.methods.chemical-synthesis.inorganic-organometallic-synthesis", "markdown": "# Polyol method\n\nThe polyol method, or polyol process, is a wet-chemical synthesis in which a metal oxide, hydroxide, or salt suspended or dissolved in a liquid polyol is heated so that the polyol itself reduces the precursor to metal, metal oxide, or alloy nanoparticles. The polyol plays three roles at once: solvent, reducing agent, and colloidal stabilizer. Polyols dissolve many metal salts at levels comparable to water, boil at high temperatures (up to 320 °C, well above water's 100 °C), possess significant reducing power, and coordinate to particle surfaces to functionalize and stabilize them against aggregation.[1](https://pubs.rsc.org/en/content/articlelanding/2015/gc/c5gc00943j) Suitable glycols, from ethylene glycol through the butanediols and polyethylene glycols, have boiling points between 185 °C and 328 °C, good thermal stability, and low cost.[2](https://patents.google.com/patent/US4539041A/en) After roughly three decades of development the process is recognized as a soft-chemical route to a large variety of nanoparticles with tailored size, shape, and composition, and it has been scaled to industrial use.[3](https://pubs.rsc.org/en/content/articlelanding/2018/cs/c7cs00777a)\n\n| Key fact | Detail |\n|---|---|\n| Products | Metal nanoparticles (Co, Ni, Cu, Ag, Pt, Pd), alloys, intermetallics, core–shell structures, and oxides such as ZnO, spinel ferrites, and Cu₂O[3](https://pubs.rsc.org/en/content/articlelanding/2018/cs/c7cs00777a) • [4](https://link.springer.com/chapter/10.1007/978-1-4471-4213-3_1); CeO₂[5](https://www.mdpi.com/1420-3049/20/6/10566) |\n| Solvent/reductant | Ethylene glycol, diethylene glycol, and related polyols; boiling points 185–328 °C[2](https://patents.google.com/patent/US4539041A/en) |\n| Mechanism | Dissolution of precursor, reduction in solution, nucleation and growth; the polyol is oxidized to aldehydes and carboxylic acids[6](https://www.nature.com/articles/s41598-022-09774-w) |\n| Typical temperatures | Reflux or microwave heating, roughly 100–350 °C depending on polyol and variant[2](https://patents.google.com/patent/US4539041A/en) • [7](https://doi.org/10.1088/0953-8984/16/14/043) |\n| Particle sizes | Micron-range powders in the original process; 9–50 nm Ag under microwave conditions; 40–800 nm Cu with lignin capping[8](https://pmc.ncbi.nlm.nih.gov/articles/PMC7097931/) • [9](https://journal.hep.com.cn/eem/EN/10.1002/eem2.70164) |\n| Throughput | Continuous-flow versions reach about 1–10 g/h (SFTR) and ~5 g/h (microwave Cu nanoinks)[5](https://www.mdpi.com/1420-3049/20/6/10566) • [9](https://journal.hep.com.cn/eem/EN/10.1002/eem2.70164) |\n| Origin | Term and method introduced by Fiévet, Lagier, and Figlarz in 1989 in MRS Bulletin; patent filed 1983, granted 1985[10](https://doi.org/10.1557/s0883769400060930) • [2](https://patents.google.com/patent/US4539041A/en) |\n\n## How it works\n\nThe reaction follows a solution-mediated scheme: the solid precursor dissolves, the dissolved metal species are reduced in solution, and the metallic phase nucleates and grows from solution.[11](https://doi.org/10.1016/0167-2738%2889%2990222-1) This sequence proceeds even when the starting solid is poorly soluble and without added water.[2](https://patents.google.com/patent/US4539041A/en) The polyol is the reductant: on heating, ethylene glycol is oxidized to aldehydes and carboxylic acids while the metal ions, for example Ag⁺, are reduced to Ag⁰.[6](https://www.nature.com/articles/s41598-022-09774-w) For silver nanostructures, glycolaldehyde, the oxidation product of ethylene glycol, was identified as the active reducing agent.[12](https://doi.org/10.1021/nl800910d)\n\nNucleation can be homogeneous or heterogeneous. Seeding the solution with foreign nuclei, such as platinum nuclei for silver growth, decouples nucleation from growth and enables monodisperse, even rod-like, particles; a protective agent adsorbing on a specific plane of the foreign nuclei acts as a crystal-habit modifier and drives anisotropic growth.[13](https://www.mdpi.com/2079-4991/10/6/1217) Additives tune the outcome. Poly(vinyl pyrrolidone) (PVP) passivates particle surfaces and protects against sintering.[8](https://pmc.ncbi.nlm.nih.gov/articles/PMC7097931/) In silver synthesis at 148 °C, a trace of sodium chloride plus oxygen from air selectively etches and dissolves twinned nuclei, leaving single-crystalline nuclei to grow into truncated cubes and tetrahedrons of 20 to 80 nm.[14](https://pubs.acs.org/nalefd/article/4/9/1733/3603486/Polyol-Synthesis-of-Silver-Nanoparticles-Use-of) For oxides, the hydrolysis ratio h, the water-to-metal molar ratio, determines whether metal, oxide, or hydroxide precipitates; oxide formation such as ZnO requires water, supplied by hydrates or added, near the boiling point to drive forced hydrolysis followed by olation and oxolation.[13](https://www.mdpi.com/2079-4991/10/6/1217)\n\n## How it is done\n\nA batch synthesis heats a suspension or solution of the precursor in the chosen polyol, usually above 85 °C and especially between 100 °C and 350 °C, often at the polyol's boiling point under reflux.[2](https://patents.google.com/patent/US4539041A/en) The patented process covers oxides, hydroxides, and salts of gold, palladium, platinum, iridium, osmium, copper, silver, nickel, cobalt, lead, and cadmium.[2](https://patents.google.com/patent/US4539041A/en) An early example boiled 12 g of Ni(OH)₂ in 200 cm³ of ethylene glycol at reflux for 68 hours, yielding metallic nickel as hexagonal disks of about 0.3 μm average diameter.[2](https://patents.google.com/patent/US4539041A/en)\n\nModern protocols add precursor and capping agent in controlled ways. For silver nanowires, 10 mL of ethylene glycol is heated at 160 °C for 1 h with stirring at 260 rpm, a CuCl₂·2H₂O/EG solution is added, then PVP/EG and AgNO₃/EG solutions are injected at controlled rates.[15](https://link.springer.com/article/10.1007/s40089-014-0108-5) An automated ([Chemputer](https://www.edgepedia.org/chemputer)) synthesis used silver nitrate in ethylene glycol with polyacrylic acid, heated to 210 °C at 400 rpm, targeting particle radii of about 3 and 5 nm; collection and washing by decanting at 24-hour intervals made the whole batch take 4 days, of which only 5 h was synthesis.[6](https://www.nature.com/articles/s41598-022-09774-w)\n\n## Origin\n\nThe term \"polyol process\" was introduced by Fiévet, Lagier, and Figlarz in 1989 in MRS Bulletin as a liquid-phase route to finely divided metals from their oxides, hydroxides, or salts.[10](https://doi.org/10.1557/s0883769400060930) The homogeneous and heterogeneous nucleation model was published by Fievet, Lagier, Blin, Beaudoin, and Figlarz in Solid State Ionics the same year.[11](https://doi.org/10.1016/0167-2738%2889%2990222-1) A patent on reducing metallic compounds with polyols was filed.[2](https://patents.google.com/patent/US4539041A/en) Controlled nucleation and growth of micrometer-size copper particles was worked out by Fernand Fievet, Françoise Fievet-Vincent, Jean-Pierre Lagier, Bernard Dumont, and Michel Figlarz in the Journal of Materials Chemistry in 1993.[16](https://doi.org/10.1039/jm9930300627)\n\n## Variants\n\nThe microwave-assisted polyol method was introduced by O. Palchik and colleagues in 2001 in the Journal of Materials Chemistry for CdSe \"nanoballs\".[17](https://doi.org/10.1039/b008088h) Sridhar Komarneni, Hiroaki Katsuki, Dongsheng Li, and Amar S Bhalla then applied the microwave–polyol process to metal nanophases at 100–200 °C.[7](https://doi.org/10.1088/0953-8984/16/14/043) [Microwave heating](https://www.edgepedia.org/microwave-heating) warms the reaction volume uniformly rather than through the vessel wall, which gives narrower size distributions, shorter reaction times, lower energy consumption, and high yield.[8](https://pmc.ncbi.nlm.nih.gov/articles/PMC7097931/) With PVP as capping agent, well-defined Ag nanoparticles of about 30–50 nm formed in ethylene glycol; morphologically well-defined Fe, Co, and Ni required both PVP and [dodecylamine](https://www.edgepedia.org/dodecylamine).[7](https://doi.org/10.1088/0953-8984/16/14/043) [Microwave](https://www.edgepedia.org/microwave) assistance can cut reaction times to minutes or even seconds, enabling continuous high-productivity operation.[18](https://pmc.ncbi.nlm.nih.gov/articles/PMC4300398/)\n\nContinuous flow addresses batch scale-up problems of mass and heat transfer. A segmented flow tubular reactor (SFTR) combined with the polyol route produced CeO₂, Ni, Ag, and Ca₃(PO₄)₂ nanoparticles at about 1–10 g per hour, run for several hours with constant product quality.[5](https://www.mdpi.com/1420-3049/20/6/10566) [Iron oxide](https://www.edgepedia.org/iron-oxide) nanoflowers have been made by the polyol route above 200 °C, where the solvents act as reducing agents, in a multi-parametric millifluidic device.[19](https://mdpi-res.com/d_attachment/nanomaterials/nanomaterials-12-00119/article_deploy/nanomaterials-12-00119-v2.pdf?version=1640933132) A continuous-flow microwave-assisted polyol process using lignin as a renewable capping agent produces copper nanoinks at about 5 g/h, with particle sizes from 800 to 40 nm depending on lignin content and metal seeding.[9](https://journal.hep.com.cn/eem/EN/10.1002/eem2.70164)\n\n## Applications\n\nMetals were the first class of inorganic nanoparticles prepared in liquid polyols, and the scope has extended from noble and ferromagnetic metals to more electropositive [post-transition metals](https://www.edgepedia.org/post-transition-metal) and semi-metals, and to alloys, intermetallics, and core–shell nanostructures with diverse compositions and architectures.[3](https://pubs.rsc.org/en/content/articlelanding/2018/cs/c7cs00777a) The process uses α-diols and ether-glycols to control nucleation and growth, yielding Fe, Co, Ni, noble metals, spinel ferrites, Cu₂O, and ZnO with uniform shape, narrow size distribution, and low agglomeration.[4](https://link.springer.com/chapter/10.1007/978-1-4471-4213-3_1) Oxide synthesis began with monodisperse submicrometer ZnO from zinc acetate dihydrate in diethylene glycol, and the first spinel ferrite (CoFe₂\\( O_{4} \\)) was made by forced hydrolysis in 1,2-propanediol at 150–225 °C under reflux.[13](https://www.mdpi.com/2079-4991/10/6/1217) Size and shape tuning supports applications in high-density recording media, permanent magnets, MRI, hyperthermia, targeted drug delivery, conductive inks, and wastewater treatment.[4](https://link.springer.com/chapter/10.1007/978-1-4471-4213-3_1) • [9](https://journal.hep.com.cn/eem/EN/10.1002/eem2.70164) • [13](https://www.mdpi.com/2079-4991/10/6/1217)\n\n## Limitations and alternatives\n\nThe original process is slow: reaction times range from several dozen minutes to several days,[2](https://patents.google.com/patent/US4539041A/en) and the automated silver protocol spent most of its 4-day batch on decanting and washing rather than synthesis.[6](https://www.nature.com/articles/s41598-022-09774-w) Longer reaction time broadens the size distribution,[6](https://www.nature.com/articles/s41598-022-09774-w) and scale-up shifts product size: a four-fold microwave scale-up changed Ag particles from the standard product to 16 ± 4 nm (CEM) and 24 ± 4 nm (Flexiwave), with a red shift in the UV–vis spectrum.[8](https://pmc.ncbi.nlm.nih.gov/articles/PMC7097931/) Reviews identify limits of the classical [polyol synthesis](https://www.edgepedia.org/polyol-synthesis) for less-noble metals and propose strategies such as phase transfer reactions and photochemical reduction to extend them.[1](https://pubs.rsc.org/en/content/articlelanding/2015/gc/c5gc00943j)\n\n No published source gives a cost breakdown in reagents, energy, and time, beyond the patent's note that glycols have a low cost price[2](https://patents.google.com/patent/US4539041A/en) and the review's statement of low cost and proven scalability.[3](https://pubs.rsc.org/en/content/articlelanding/2018/cs/c7cs00777a) Systematic characterization of failure modes such as incomplete reduction, aggregation, and product oxidation is likewise not covered, though the chloride-and-oxygen etching of twinned nuclei[14](https://pubs.acs.org/nalefd/article/4/9/1733/3603486/Polyol-Synthesis-of-Silver-Nanoparticles-Use-of) and the NaOH-formed sodium-carbonate passivation layer that protects iron particles from irreversible oxidation[13](https://www.mdpi.com/2079-4991/10/6/1217) illustrate how specific additives counter specific defects.\n\n## References\n\n1. [Polyol synthesis of nanoparticles: status and options regarding metals, oxides, chalcogenides, and non-metal elements](https://pubs.rsc.org/en/content/articlelanding/2015/gc/c5gc00943j)\n2. [US4539041A - Process for the reduction of metallic compounds by polyols, and metallic powders obtained by this process](https://patents.google.com/patent/US4539041A/en)\n3. [The polyol process: a unique method for easy access to metal nanoparticles with tailored sizes, shapes and compositions](https://pubs.rsc.org/en/content/articlelanding/2018/cs/c7cs00777a)\n4. [The Polyol Process (book chapter, Nanomaterials: A Danger or a Promise?, Springer, 2013)](https://link.springer.com/chapter/10.1007/978-1-4471-4213-3_1)\n5. [Continuous Polyol Synthesis of Metal and Metal Oxide Nanoparticles Using a Segmented Flow Tubular Reactor (SFTR)](https://www.mdpi.com/1420-3049/20/6/10566)\n6. [Towards automation of the polyol process for the synthesis of silver nanoparticles (Scientific Reports, 2022)](https://www.nature.com/articles/s41598-022-09774-w)\n7. [Sridhar Komarneni and colleagues (2004). Microwave–polyol process for metal nanophases. Journal of Physics Condensed Matter.](https://doi.org/10.1088/0953-8984/16/14/043)\n8. [From Silver Plates to Spherical Nanoparticles: Snapshots of Microwave-Assisted Polyol Synthesis](https://pmc.ncbi.nlm.nih.gov/articles/PMC7097931/)\n9. [Copper-Based Conductive Nanoinks: Scalable Synthesis via Continuous-Flow Microwave-Assisted Polyol Process](https://journal.hep.com.cn/eem/EN/10.1002/eem2.70164)\n10. [F. Fievet, J.P. Lagier, M. Figlarz (1989). Preparing Monodisperse Metal Powders in Micrometer and Submicrometer Sizes by the Polyol Process. MRS Bulletin.](https://doi.org/10.1557/s0883769400060930)\n11. [Homogeneous and heterogeneous nucleations in the polyol process for the preparation of micron and submicron size metal particles (Solid State Ionics, 1989)](https://doi.org/10.1016/0167-2738%2889%2990222-1)\n12. [Sara E. Skrabalak and colleagues (2008). On the Polyol Synthesis of Silver Nanostructures: Glycolaldehyde as a Reducing Agent. Nano Letters.](https://doi.org/10.1021/nl800910d)\n13. [Polyol Synthesis: A Versatile Wet-Chemistry Route for the Design and Production of Functional Inorganic Nanoparticles](https://www.mdpi.com/2079-4991/10/6/1217)\n14. [Polyol Synthesis of Silver Nanoparticles: Use of Chloride and Oxygen to Promote the Formation of Single-Crystal, Truncated Cubes and Tetrahedrons (Nano Letters, 2004)](https://pubs.acs.org/nalefd/article/4/9/1733/3603486/Polyol-Synthesis-of-Silver-Nanoparticles-Use-of)\n15. [The effects of physicochemical parameters on the synthesis of silver nanowires via polyol method (International Nano Letters)](https://link.springer.com/article/10.1007/s40089-014-0108-5)\n16. [Fernand Fievet and colleagues (1993). Controlled nucleation and growth of micrometre-size copper particles prepared by the polyol process. Journal of Materials Chemistry.](https://doi.org/10.1039/jm9930300627)\n17. [O. Palchik and colleagues (2001). Microwave-assisted polyol method for the preparation of CdSe \"nanoballs\". Journal of Materials Chemistry.](https://doi.org/10.1039/b008088h)\n18. [Rapid continuous microwave-assisted synthesis of silver nanoparticles to achieve very high productivity and full yield](https://pmc.ncbi.nlm.nih.gov/articles/PMC4300398/)\n19. [High Temperature Continuous Flow Syntheses of Iron Oxide Nanoflowers Using the Polyol Route in a Multi-Parametric Millifluidic Device](https://mdpi-res.com/d_attachment/nanomaterials/nanomaterials-12-00119/article_deploy/nanomaterials-12-00119-v2.pdf?version=1640933132)\n\n---\n*Topic: Encyclopedia › Physical world and mathematics › Chemistry › Chemical principles and methods › Chemical synthesis › Inorganic and organometallic synthesis*\n\n*Initially written Sep 29, 2026 · Edited: Oct 15, 2026*\n\n*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*\n\nLicense: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license\n", "same_as": [], "url": "https://www.edgepedia.org/polyol-method", "markdown_url": "https://www.edgepedia.org/polyol-method.md", "license": { "name": "Edgepedia Community License 1.0", "url": "https://www.edgepedia.org/edgepedia/license", "summary": "Free with credit, commercial use included. AI training is open to everyone. For other uses, organizations over USD 100M in revenue or 100M monthly users license separately.", "spdx": "LicenseRef-Edgepedia-Community-1.0" }, "credit": "\"Polyol method\", Edgepedia (EdgeChat), https://www.edgepedia.org/polyol-method. Edgepedia Community License 1.0.", "credit_md": "\"[Polyol method](https://www.edgepedia.org/polyol-method)\", Edgepedia (EdgeChat), [https://www.edgepedia.org/polyol-method](https://www.edgepedia.org/polyol-method). [Edgepedia Community License 1.0](https://www.edgepedia.org/edgepedia/license).", "credit_html": "\"Polyol method\", Edgepedia (EdgeChat), https://www.edgepedia.org/polyol-method. Edgepedia Community License 1.0.", "speakable": "The polyol method, or polyol process, is a wet-chemical synthesis in which a heated polyol acts as solvent, reducing agent, and stabilizer, yielding metal and oxide nanoparticles." }