{ "id": "epzzq0j4z5", "slug": "pressure-controlled-scanning-calorimetry", "title": "Pressure-controlled scanning calorimetry", "updated": "2026-10-15", "topic_path": [ { "id": "physical", "label": "Physical world and mathematics", "api_url": "https://www.edgepedia.org/api/v1/topics/physical" }, { "id": "physical.physics", "label": "Physics", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.physics" }, { "id": "physical.physics.matter-and-radiation", "label": "Matter and radiation physics", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.physics.matter-and-radiation" }, { "id": "physical.physics.matter-and-radiation.condensed-matter", "label": "Condensed matter physics", "api_url": "https://www.edgepedia.org/api/v1/topics/physical.physics.matter-and-radiation.condensed-matter" } ], "geo": [ { "id": "geo.nongeo.t1946.physical.physics.matter-and-radiation.condensed-matter", "label": "Non-geographic · 1946 to 2000: Condensed matter physics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.physics.matter-and-radiation.condensed-matter", "path": [ { "id": "geo.nongeo", "label": "Non-geographic", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo" }, { "id": "geo.nongeo.t1946", "label": "Non-geographic · 1946 to 2000", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946" }, { "id": "geo.nongeo.t1946.physical", "label": "Physical world and mathematics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical" }, { "id": "geo.nongeo.t1946.physical.physics", "label": "Physics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.physics" }, { "id": "geo.nongeo.t1946.physical.physics.matter-and-radiation", "label": "Matter and radiation physics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.physics.matter-and-radiation" }, { "id": "geo.nongeo.t1946.physical.physics.matter-and-radiation.condensed-matter", "label": "Condensed matter physics", "api_url": "https://www.edgepedia.org/api/v1/geo/geo.nongeo.t1946.physical.physics.matter-and-radiation.condensed-matter" } ] } ], "excerpt": "Pressure-controlled scanning calorimetry (PCSC) is a calorimetric technique in which pressure, rather than temperature, is scanned, revealing how pressure shifts phase transitions like fusion and lipid melting.", "snippet": "Pressure-controlled scanning calorimetry (PCSC) is a calorimetric technique in which pressure, rather than temperature, is scanned, revealing how pressure shifts phase transitions like fusion and lipid melting.", "node": "physical.physics.matter-and-radiation.condensed-matter", "markdown": "# Pressure-controlled scanning calorimetry\n\nPressure-controlled scanning calorimetry (PCSC) is a calorimetric technique in which pressure, rather than temperature, is the variable programmed during the scan, so the instrument records thermal power and energy as a continuous function of pressure while temperature, volume, or composition is held or varied under control.[1](https://doi.org/10.1088/0022-3735/16/7/029) The method measures quantities such as \\( (\\partial S / \\partial p)_{T} \\), heat capacity, expansibility, and transition enthalpies, and it reveals how pressure shifts phase transitions.[2](https://doi.org/10.1351/pac199163101409) Because many phase boundaries (fusion, crystallization, lipid gel-to-liquid-crystal transitions, barocaloric transitions) move strongly with pressure, controlling pressure during a scan gives access to phase behavior that ordinary differential scanning calorimetry (DSC) cannot reach.[3](https://link.springer.com/article/10.1007/s10953-023-01267-2)\n\n| Key fact | Value |\n|---|---|\n| Defining feature | Pressure is the inducing variable, varied linearly or stepwise with time[2](https://doi.org/10.1351/pac199163101409) |\n| First instrument | Randzio's 1983 pressure-scanning calorimeter, 0.1–35 MPa, up to 473 K[1](https://doi.org/10.1088/0022-3735/16/7/029) |\n| Extended range (1994) | 0.1–400 MPa, 303–573 K, pressure rates down to 0.002 MPa/s[4](https://doi.org/10.1063/1.1144926) |\n| Highest-pressure custom HP-DSC | 0.1–500 MPa, 20–300 °C, 0.5–20 K/min, silicone oil medium[5](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437) |\n| Commercial pressure DSC | about 7–15 MPa (TA 7 MPa gauge, Mettler 10 MPa, NETZSCH 15 MPa)[6](https://amsec.wwu.edu/sites/amsec.wwu.edu/files/2020-08/HP-DSC_SOPs.pdf) • [7](https://photos.labwrench.com/equipmentManuals/7470-2722.pdf) • [8](https://analyzing-testing.netzsch.com/_Resources/Persistent/4/d/1/6/4d160ff4e2620a1fccfcd0f5435720372be716bf/DSC_204_HP_Phoenix_E.pdf) |\n| Scanning transitiometry | up to 700 MPa and 500 K[3](https://link.springer.com/article/10.1007/s10953-023-01267-2) |\n| Typical lipid result | DPPC melting temperature rises about 34 °C at 200 MPa[9](http://protein.bio.msu.ru/biokhimiya/contents/v83/pdf/BCMS134.pdf) |\n\n## How it works\n\nThe signal of a pressure-scanning calorimeter has a defined thermodynamic meaning. Randzio's 1984 analysis gave mathematical formulae for the calorimetric signal in general use and for first-order phase transitions, showing that the slope of a fusion thermogram depends on the calorimeter properties, the rate of pressure variation, and the \\( dp/dT \\) slope of the substance's phase boundary.[10](https://iopscience.iop.org/article/10.1088/0022-3735/17/11/031) Measuring transition peak temperatures at several pressures and fitting the phase boundary lets the volume change of transition be extracted through Clausius-Clapeyron analysis; the same approach yields vaporization enthalpies from vapor-pressure curves plotted via the modified Clausius-Clapeyron equation.[7](https://photos.labwrench.com/equipmentManuals/7470-2722.pdf)\n\nTwo additive terms make up the heat capacity measured when pressure changes: the isobaric heat capacity and an expansibility term. These contributions can be experimentally separated, so heat capacity and expansibility are obtained simultaneously from scans under pressure control or modulation.[11](https://doi.org/10.1021/ac0516436) In transitiometry, the pressure-scan method is described as the fastest, most reproducible, and accurate way to determine heat capacity at high pressure, because temperature-program methods suffer from the thick vessel walls of high-pressure cells.[3](https://link.springer.com/article/10.1007/s10953-023-01267-2)\n\n## How it is done\n\nThe 1983 instrument used a differential calorimeter with power compensation; pressure was imposed as a linear function of time by a programming system with a feedback loop.[1](https://doi.org/10.1088/0022-3735/16/7/029) Later instruments automated this with digital feedbacks and a piston pump driven by a stepping motor for pressures above roughly 100 MPa, with typical scan rates of 5 kPa/s in pressure and \\( 8 \\times 10^{-4} \\) K/s in temperature and sample volumes of 0.5–2.5 cm³.[2](https://doi.org/10.1351/pac199163101409) The 1994 version extended the range to 0.1–400 MPa at 303–573 K and was calibrated with gaseous nitrogen and liquid n-hexane, with results compared against the piezothermal technique.[4](https://doi.org/10.1063/1.1144926)\n\nIn high-pressure DSC practice, the DSC sensor sits inside an autoclave; the Aberdeen HP-DSC uses silicone oil as the pressurizing medium around a power-compensation Perkin-Elmer Pyris Diamond DSC, and calibrates enthalpy and temperature from the pressure dependence of indium and tin melting, giving a dimensionless correction factor \\( R_{\\mathrm{corr}}(p) \\).[5](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437) Commercial cells differ in sensor layout, for example the TA pressure DSC, a steel cylinder rated to 7 MPa gauge with an 8.3 MPa relief valve.[6](https://amsec.wwu.edu/sites/amsec.wwu.edu/files/2020-08/HP-DSC_SOPs.pdf)\n\n## Origin\n\nS. L. Randzio introduced the pressure-scanning calorimeter in 1983 in the Journal of Physics E: Scientific Instruments, for 0.1–35 MPa and temperatures up to 473 K, demonstrating pressure-induced crystallization and fusion of diphenyl ether.[1](https://doi.org/10.1088/0022-3735/16/7/029) The follow-up paper supplied the signal analysis,[10](https://iopscience.iop.org/article/10.1088/0022-3735/17/11/031) and his 1991 Pure and Applied Chemistry paper formalized the terminology \"pressure-controlled scanning calorimeters (PCSC)\" within a family of temperature-, pressure-, volume-, and composition-controlled scanning calorimeters.[2](https://doi.org/10.1351/pac199163101409) Earlier work the method built on includes M. Kamphausen's 1975 differential scanning high pressure microcalorimeter in the Review of Scientific Instruments[12](https://doi.org/10.1063/1.1134286) and the 1977 piezo-thermal analysis of Léon Ter Minassian and Philippe Pruzan for high-pressure expansivity.[13](https://doi.org/10.1016/0021-9614%2877%2990059-3) K. Blankenhorn and G. W. H. Höhne described a high-pressure DSC cell in 1991 in Thermochimica Acta.[14](https://doi.org/10.1016/0040-6031%2891%2987196-4)\n\n## Variants\n\nSeveral related configurations differ in what is scanned and how far the pressure reaches:\n\n- **PCSC proper**: pressure is the inducing variable, varied linearly or stepwise, giving isothermal scans that measure \\( (\\partial S / \\partial p)_{T} \\).[2](https://doi.org/10.1351/pac199163101409)\n- **High-pressure DSC (HP-DSC)**: a temperature scan under fixed high pressure; the Aberdeen HP-DSC, based on the Blankenhorn–Höhne design, reaches 500 MPa.[5](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437)\n- **Commercial pressure DSC**: TA cells to 7 MPa gauge (with modulated DSC under pressure on the Discovery DSC 25P),[6](https://amsec.wwu.edu/sites/amsec.wwu.edu/files/2020-08/HP-DSC_SOPs.pdf) • [15](https://www.tainstruments.com/discovery-dsc-25p/) Mettler HP DSC 1 to 10 MPa overpressure and 700 °C,[7](https://photos.labwrench.com/equipmentManuals/7470-2722.pdf) and NETZSCH DSC 204 HP Phoenix to 15 MPa.[8](https://analyzing-testing.netzsch.com/_Resources/Persistent/4/d/1/6/4d160ff4e2620a1fccfcd0f5435720372be716bf/DSC_204_HP_Phoenix_E.pdf)\n- **Pressure-modulated DSC**: a pressure modulation superimposed on a temperature scan, with theory given by Jörg Rösgen and Hans-Jürgen Hinz in 2006 in Analytical Chemistry.[11](https://doi.org/10.1021/ac0516436) • [11](https://doi.org/10.1021/ac0516436)\n- **High-pressure scanning microcalorimetry**: instruments built in 2007–2009 at the Institute of Protein Research of the [Russian Academy of Sciences](https://www.edgepedia.org/russian-academy-of-sciences) operate up to 6000 atm on 0.3 mg of biological material.[9](http://protein.bio.msu.ru/biokhimiya/contents/v83/pdf/BCMS134.pdf)\n- **Scanning transitiometry**: pressure scans up to 700 MPa and 500 K with a Tian–Calvet sensor that detects up to 94% of transferred heat.[3](https://link.springer.com/article/10.1007/s10953-023-01267-2)\n- **Pressure perturbation calorimetry (PPC)**: small pressure jumps during a temperature scan, applied to lipid bilayers by Heiko Heerklotz and Joachim Seelig in 2002[16](https://doi.org/10.1016/s0006-3495%2802%2975498-2) and to aqueous polymer solutions by Piotr Kujawa and Françoise M. Winnik in 2001.[17](https://doi.org/10.1021/ma002082h)\n\n## Applications\n\n**Polymers.** HP-DSC of poly(lactic acid) grades in CO₂ at pressures up to 100 MPa found melting and crystallization temperatures up to 84 K lower in the presence of CO₂, information relevant to CO₂-assisted processing.[5](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437) For poly(N-isopropylacrylamide) (PNIPAM), increasing pressure decreases the transition enthalpy and the transition temperature passes through a maximum, meaning the partial volume change is positive at low pressures and negative at high pressures.[9](http://protein.bio.msu.ru/biokhimiya/contents/v83/pdf/BCMS134.pdf)\n\n**Lipids and biopolymers.** Raising pressure to 200 MPa increases the DPPC melting temperature by about 34 °C, a direct Clapeyron shift used to map volume changes of lipid transitions; the gel-to-liquid-crystal transition raises the bilayer's partial volume by about 3.2% at ambient pressure.[9](http://protein.bio.msu.ru/biokhimiya/contents/v83/pdf/BCMS134.pdf) High-pressure differential thermal analysis of lipid lamellar-to-non-lamellar transitions was demonstrated by A. Landwehr and [R. Winter](https://www.edgepedia.org/roland-winter) in 1994.[18](https://doi.org/10.1002/bbpc.19940980214) In 2025, barocaloric studies used fast pressure ramps with Clausius-Clapeyron analysis, measuring for KPF₆ adiabatic temperature changes of about 9.6 K on pressurization and 9.1 K on depressurization at 300 K under a 250 MPa cycle.[19](https://www.nature.com/articles/s41467-025-63068-z)\n\n**Industrial and materials testing.** Commercial pressure DSC supports oxidation-induction-time tests of oils under oxygen (ASTM D6186 and related standards), vapor-pressure and evaporation-heat measurements (ASTM E1782), thermoset curing, and gas–solid reactions.[8](https://analyzing-testing.netzsch.com/_Resources/Persistent/4/d/1/6/4d160ff4e2620a1fccfcd0f5435720372be716bf/DSC_204_HP_Phoenix_E.pdf) Transitiometry determines heat capacity, thermal expansion coefficient, and isothermal compressibility under high pressure for process modeling.[3](https://link.springer.com/article/10.1007/s10953-023-01267-2)\n\n## Limitations and alternatives\n\n**Pressure-medium artifacts** dominate the failure modes of oil-pressurized HP-DSC. The oil may decompose at higher temperatures, react with the sample, solidify or crystallize at higher pressures, and fill small cavities poorly.[20](https://www.sciencedirect.com/science/article/abs/pii/S0040603199000660) In a 500 MPa instrument, thermal noise of 50–100 μW (ten times a normal DSC), a peak detection limit of 5 mJ (1 J/g), and baseline repeatability of 2–3 mW from oil-volume differences on remounting make cp-mode measurements impossible.[20](https://www.sciencedirect.com/science/article/abs/pii/S0040603199000660) No commercial HP-DSC reaching 500 MPa exists, so workers build their own instruments, and high pressures demand safety precautions.[20](https://www.sciencedirect.com/science/article/abs/pii/S0040603199000660)\n\n**Comparison with alternatives.** Commercial pressure DSC cells reach only about 7–15 MPa,[6](https://amsec.wwu.edu/sites/amsec.wwu.edu/files/2020-08/HP-DSC_SOPs.pdf) • [7](https://photos.labwrench.com/equipmentManuals/7470-2722.pdf) • [8](https://analyzing-testing.netzsch.com/_Resources/Persistent/4/d/1/6/4d160ff4e2620a1fccfcd0f5435720372be716bf/DSC_204_HP_Phoenix_E.pdf) although one calibration paper states that commercial \"high pressure differential scanning calorimeters\" operate up to about 40 MPa; the discrepancy reflects different instrument generations and definitions.[5](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437) Calvet-type high-pressure microcalorimeters (for example the SETARAM Sensys, 500 bar at 600 °C, 5 μW detection limit, \\( C_{p} \\) accuracy ±1%) trade pressure ceiling for baseline stability.[21](https://www.instrumenthive.com/products/setaram-sensys-dsc-high-pressure-calvet-microcalorimeter/) Scanning transitiometry and PVT scanning calorimetry extend to 700 MPa but with slow heating rates (1–5 mK·s⁻¹) imposed by massive cells.[3](https://link.springer.com/article/10.1007/s10953-023-01267-2) Above roughly 10 GPa, diamond-anvil-cell optical methods (thermal grating, thermocouple, Raman opto-thermal, time-domain thermoreflectance) replace piston-cylinder and multi-anvil approaches.[22](https://par.nsf.gov/servlets/purl/10402331) A general caution from the phase-equilibria literature applies: published high-pressure data often claim higher accuracy than the true accuracy achieved.[23](https://www.annualreviews.org/content/journals/10.1146/annurev-chembioeng-062011-081008)\n\n## References\n\n1. [S L Randzio (1983). A pressure-scanning calorimeter. Journal of Physics E Scientific Instruments.](https://doi.org/10.1088/0022-3735/16/7/029)\n2. [S. L. Randzio (1991). Scanning calorimetry with various inducing variables and multi-output signals. Pure and Applied Chemistry.](https://doi.org/10.1351/pac199163101409)\n3. [Applications of Transitiometry: Determination of Thermophysical Properties and Decomposition Kinetics of Peroxide(Mixtures) Under High-Pressure (Journal of Solution Chemistry, 2023)](https://link.springer.com/article/10.1007/s10953-023-01267-2)\n4. [An isothermal scanning calorimeter controlled by linear pressure variations from 0.1 to 400 MPa. Calibration and comparison with the piezothermal technique](https://doi.org/10.1063/1.1144926)\n5. [High pressure differential scanning calorimetry: Aspects of calibration (Ledru et al., Thermochimica Acta, 2006)](https://www.sciencedirect.com/science/article/abs/pii/S0040603106002437)\n6. [TA Instruments PDSC Getting Started Guide (Q Series Pressure DSC cell)](https://amsec.wwu.edu/sites/amsec.wwu.edu/files/2020-08/HP-DSC_SOPs.pdf)\n7. [Mettler Toledo HP DSC 1 documentation](https://photos.labwrench.com/equipmentManuals/7470-2722.pdf)\n8. [DSC 204 HP Phoenix, Method, Technique and Applications (NETZSCH brochure)](https://analyzing-testing.netzsch.com/_Resources/Persistent/4/d/1/6/4d160ff4e2620a1fccfcd0f5435720372be716bf/DSC_204_HP_Phoenix_E.pdf)\n9. [High-Pressure Scanning Microcalorimetry – A New Method for Studying Conformational and Phase Transitions (Biochemistry (Moscow))](http://protein.bio.msu.ru/biokhimiya/contents/v83/pdf/BCMS134.pdf)\n10. [The analysis of a pressure-controlled differential scanning calorimeter](https://iopscience.iop.org/article/10.1088/0022-3735/17/11/031)\n11. [Pressure-Modulated Differential Scanning Calorimetry: Theoretical Background (Analytical Chemistry, 2006)](https://doi.org/10.1021/ac0516436)\n12. [M. Kamphausen (1975). New differential scanning high pressure microcalorimeter. Review of Scientific Instruments.](https://doi.org/10.1063/1.1134286)\n13. [High-pressure expansivity of materials determined by piezo-thermal analysis (The Journal of Chemical Thermodynamics, 1977)](https://doi.org/10.1016/0021-9614%2877%2990059-3)\n14. [Design, specifications and application of a high pressure DSC cell (Thermochimica Acta, 1991)](https://doi.org/10.1016/0040-6031%2891%2987196-4)\n15. [TA Instruments Discovery DSC 25P pressure DSC](https://www.tainstruments.com/discovery-dsc-25p/)\n16. [Application of Pressure Perturbation Calorimetry to Lipid Bilayers (Biophysical Journal, 2002)](https://doi.org/10.1016/s0006-3495%2802%2975498-2)\n17. [Piotr Kujawa, Françoise M. Winnik (2001). Volumetric Studies of Aqueous Polymer Solutions Using Pressure Perturbation Calorimetry: A New Look at the Temperature-Induced Phase Transition of Poly(N-isopropylacrylamide) in Water and D2O. Macromolecules.](https://doi.org/10.1021/ma002082h)\n18. [A. Landwehr, R. Winter (1994). High‐pressure differential thermal analysis of lamellar to lamellar and lamellar to non‐lamellar lipid phase transitions. Berichte der Bunsengesellschaft für physikalische Chemie.](https://doi.org/10.1002/bbpc.19940980214)\n19. [All-temperature barocaloric effects at pressure-induced phase transitions | Nature Communications](https://www.nature.com/articles/s41467-025-63068-z)\n20. [High pressure differential scanning calorimetry on polymers (Thermochimica Acta, 1999)](https://www.sciencedirect.com/science/article/abs/pii/S0040603199000660)\n21. [SETARAM Sensys DSC High-Pressure Calvet Microcalorimeter](https://www.instrumenthive.com/products/setaram-sensys-dsc-high-pressure-calvet-microcalorimeter/)\n22. [Thermal Properties of Materials under Pressure (NSF public access review)](https://par.nsf.gov/servlets/purl/10402331)\n23. [Experimental Methods for Phase Equilibria at High Pressures (Annual Review of Chemical and Biomolecular Engineering, 2012)](https://www.annualreviews.org/content/journals/10.1146/annurev-chembioeng-062011-081008)\n\n---\n*Topic: Encyclopedia › Physical world and mathematics › Physics › Matter and radiation physics › Condensed matter physics*\n\n*Initially written Sep 29, 2026 · Edited: Oct 15, 2026*\n\n*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*\n\nLicense: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license\n", "same_as": [], "url": "https://www.edgepedia.org/pressure-controlled-scanning-calorimetry", "markdown_url": "https://www.edgepedia.org/pressure-controlled-scanning-calorimetry.md", "license": { "name": "Edgepedia Community License 1.0", "url": "https://www.edgepedia.org/edgepedia/license", "summary": "Free with credit, commercial use included. AI training is open to everyone. For other uses, organizations over USD 100M in revenue or 100M monthly users license separately.", "spdx": "LicenseRef-Edgepedia-Community-1.0" }, "credit": "\"Pressure-controlled scanning calorimetry\", Edgepedia (EdgeChat), https://www.edgepedia.org/pressure-controlled-scanning-calorimetry. Edgepedia Community License 1.0.", "credit_md": "\"[Pressure-controlled scanning calorimetry](https://www.edgepedia.org/pressure-controlled-scanning-calorimetry)\", Edgepedia (EdgeChat), [https://www.edgepedia.org/pressure-controlled-scanning-calorimetry](https://www.edgepedia.org/pressure-controlled-scanning-calorimetry). [Edgepedia Community License 1.0](https://www.edgepedia.org/edgepedia/license).", "credit_html": "\"Pressure-controlled scanning calorimetry\", Edgepedia (EdgeChat), https://www.edgepedia.org/pressure-controlled-scanning-calorimetry. Edgepedia Community License 1.0.", "speakable": "Pressure-controlled scanning calorimetry is a calorimetric technique in which pressure, rather than temperature, is scanned, revealing how pressure shifts phase transitions like fusion and lipid melting." }