edgepedia

All articles A–Z

519,064 articles

Polymer solid-state electrolytes

Polymer solid-state electrolytes are salt-doped polymer membranes that conduct lithium ions between battery electrodes while remaining solid, safer than liquids but so poorly conducting at room temperature that cells usually run warm.

Polymer synthesis in supercritical carbon dioxide

Polymer synthesis in supercritical carbon dioxide carries out polymerization in CO₂ above 31.1 °C and 73.8 bar, a tunable green solvent; depressurization leaves dry polymer with no solvent waste.

Polymer thermoelectrics

Polymer thermoelectrics are polymer-based materials that convert heat directly into electricity or cooling through the Seebeck and Peltier effects, with PEDOT the most developed example.

Polymer translocation through nanopores

Polymer translocation through nanopores is the process by which a polymer chain, such as DNA or a protein, crosses a membrane through a pore only a few nanometers wide.

Polymer-bonded explosive

A polymer-bonded explosive (PBX), also called a plastic-bonded explosive, binds explosive crystals such as RDX or HMX in a synthetic polymer matrix that reduces shock sensitivity; the first PBX was made at Los Alamos in 1952.

Polymer-ceramic composite electrolyte

A polymer-ceramic composite electrolyte is a solid ion-conducting battery material combining a polymer-salt matrix with a ceramic phase, studied as a safer, nonflammable route toward solid-state lithium and sodium batteries.

Polymer-derived ceramics

Polymer-derived ceramics (PDCs) are ceramic materials produced by heating preceramic polymers above about 800 °C, allowing shaping by molding or 3D printing before the ceramic exists.

Polymer-derived SiBCN ceramics

Polymer-derived SiBCN ceramics are quaternary non-oxide ceramics of silicon, boron, carbon, and nitrogen, made by pyrolyzing polyborosilazane precursors, with oxidation resistance exceeding that of SiC and Si₃N₄.

Polymer-dispersed liquid crystal

A polymer-dispersed liquid crystal (PDLC) is a composite film of liquid crystal droplets in a solid polymer matrix that switches electrically between a milky, light-scattering state and a transparent state.

Polymer-modified asphalt

Polymer-modified asphalt, also called polymer-modified bitumen, is an asphalt binder produced by dispersing 3 to 7 percent polymer into molten asphalt to resist rutting, fatigue cracking, and thermal cracking.

Polymerase chain reaction

Polymerase chain reaction (PCR), invented by Kary Mullis in 1983 at Cetus, is a lab method amplifying specific DNA segments via denaturation, primer annealing, and Taq polymerase extension cycles; Nobel Prize 1993; basis of qPCR and digital PCR.

Polymeric carbon dioxide

Polymeric carbon dioxide, best known as phase V (CO₂-V), is a superhard crystalline form of solid CO₂ in which molecules become a covalent network, formed above about 40 GPa.

Polymeric micelles for siRNA delivery

Polymeric micelles for siRNA delivery are nanoscale core-shell carriers of 10 to 100 nm, self-assembled from amphiphilic block copolymers, that protect siRNA and deliver it into cells for gene silencing.

Polymerization

Polymerization, also called polymerise, is the chemical process in which monomers bond repeatedly into macromolecules, proceeding by chain or step growth in processes such as bulk and emulsion polymerization.

Polymerization-induced phase separation

Polymerization-induced phase separation (PIPS) is a fabrication method in which polymerization drives a homogeneous resin to separate into phases, used in liquid crystal displays and battery separators.

Polymerization-induced self-assembly

Polymerization-induced self-assembly (PISA) is a one-pot method, first reported in 2002, in which growing insoluble polymer blocks self-assemble in situ into block copolymer nanoparticles, reaching up to 50% solids without post-purification.

Polymetallic nodule

A polymetallic nodule, or manganese nodule, is a rock concretion on the deep ocean floor, rich in manganese, iron, nickel, copper, and cobalt, and targeted for deep-sea mining.

Polymethyl methacrylate bone cement

Polymethyl methacrylate (PMMA) bone cement is a self-curing acrylic grout, mixed from liquid monomer and powder in the operating room, used to fix hip and knee prostheses to living bone.

Polymethylhydrosiloxane

Polymethylhydrosiloxane (PMHS) is a linear silicone polymer, sold as a colorless liquid, used in organic synthesis as a mild, inexpensive hydride donor for metal-catalyzed reductions.

Polymorphic code

Polymorphic code is software that mutates into a different version of itself with each run while keeping the same function, a technique used by malware to evade antivirus detection.

Polymorphic light eruption

Polymorphic light eruption (PMLE, polymorphous light eruption, sun allergy) is the most common photodermatosis: an itchy, delayed type IV hypersensitivity rash on sun-exposed skin, affecting 10-20% of people, mostly women aged 20-40.

Polymorphic post-transplant lymphoproliferative disorder

Polymorphic post-transplant lymphoproliferative disorder, or polymorphic PTLD, is a clonal B-cell disorder driven by post-transplant immunosuppression, usually EBV-positive and often regressing when immunosuppression is reduced.

Polymorphic ventricular tachycardia

Polymorphic ventricular tachycardia (PVT, PMVT): a fast ventricular arrhythmia with beat-to-beat QRS change; includes torsades de pointes (long QT) and catecholaminergic PVT; treated with immediate defibrillation.

Polymorphism (biology)

Polymorphism (biology): occurrence of two or more alleles or morphs of a trait in one species population, conventionally least-common allele at 1% or higher; maintained by balancing selection, heterozygote advantage, frequency dependence, or mutation-selection balance, as in sickle cell and MHC polymorphism.

Polymorphism (computer science)

Polymorphism, also known as type polymorphism, is a computer science concept letting code work with values of many types, including subtype, parametric, and ad hoc polymorphism.

Polymyalgia rheumatica

Polymyalgia rheumatica (PMR) is an inflammatory rheumatic disease of people over 50 causing shoulder, neck, and hip girdle pain and morning stiffness, treated with prednisolone 12.5–15 mg daily, and overlapping with giant cell arteritis.

Polymyositis

Polymyositis (PM) is a rare idiopathic inflammatory myopathy causing symmetric proximal muscle weakness, defined by CD8+ T-cell invasion of MHC-I-expressing muscle fibers, treated with corticosteroids and immunosuppressants.

Polymyxin B

Polymyxin B is a lipopeptide antibiotic produced by the soil bacterium Paenibacillus polymyxa, discovered in 1947 and used as a last-line treatment for multidrug-resistant Gram-negative infections.

Polymyxin resistant Acinetobacter baumannii

Polymyxin resistant Acinetobacter baumannii (PRAB, ICD-11 MG50.03): hospital pathogen resistant to last-resort colistin and polymyxin B, via pmrAB lipid A modification or LPS loss; about 13% global rate.

Polymyxin resistant Escherichia coli

Polymyxin-resistant Escherichia coli: E. coli strains resisting colistin and polymyxin B via chromosomal pmrAB/phoPQ/mgrB mutations or transferable mcr-1 through mcr-10 plasmid genes, first reported in China in 2015 and now found on five continents.