edgepedia

All articles A–Z

519,064 articles

Laser flash analysis

Laser flash analysis is a fast, non-contact method that heats a small disk with a laser pulse and records the rear-face temperature rise to measure thermal diffusivity.

Laser foil printing

Laser foil printing is a metal additive manufacturing process that builds parts layer by layer from thin metal foils, developed at Missouri University of Science and Technology.

Laser guide star

A laser guide star is an artificial star created in the upper atmosphere by a laser projected from a telescope site, used as a reference for adaptive optics.

Laser hair removal

Laser hair removal uses focused light, via selective photothermolysis of melanin at 600–1200 nm, to damage follicles and reduce hair growth. Cleared by FDA as Class II devices for permanent hair reduction, not removal.

Laser hardening

Laser hardening, also called laser transformation hardening or laser quenching, is a surface heat treatment that hardens steel and cast iron with a scanning laser beam, commercialized in the 1970s.

Laser ignition

Laser ignition is a combustion-ignition method in which a focused pulsed laser beam creates a plasma spark in a fuel–air mixture, replacing the spark plug in engines and combustors.

Laser interferometer

A laser interferometer is a measurement instrument that determines distance or displacement by counting interference fringes of laser light, used to calibrate machines and enabling LIGO's gravitational-wave detection.

Laser Interferometer Space Antenna

The Laser Interferometer Space Antenna (LISA) is an ESA-led space gravitational-wave observatory with NASA participation, planned to launch in 2035 with three spacecraft flying 2.5 million km apart.

Laser interferometric displacement measurement

Laser interferometric displacement measurement determines changes in position by counting laser interference fringes; displacement measuring interferometers, sold since the early 1970s, are the reference standard for dimensional calibration.

Laser interferometry

Laser interferometry is a measurement technique that determines distance or displacement by counting and interpolating interference fringes of laser light, underpinning top-level length metrology in industry and science.

Laser interstitial thermal therapy

Laser interstitial thermal therapy (LITT) is a minimally invasive neurosurgical procedure in which a laser fiber, inserted through a small skull opening, destroys brain tumors, radiation necrosis, or epileptic foci under real-time MRI temperature monitoring.

Laser linewidth

Laser linewidth is the width of a laser's optical spectrum, reported as full width at half maximum and serving as a measure of the laser's phase noise.

Laser linewidth measurement

Laser linewidth measurement is the experimental determination of the spectral width of a laser's optical emission, set mainly by phase jitter, using interferometric and phase-noise techniques.

Laser lithography

Laser lithography is a maskless microfabrication technique that uses a focused laser beam to pattern photoresists and substrates directly, from nanometer features to centimeter-scale 3D structures.

Laser lithotripsy

Laser lithotripsy is an endourological procedure that fragments kidney, ureteral, or bladder stones by delivering pulsed laser energy through an optical fiber inside a ureteroscope or nephroscope.

Laser machining

Laser machining is a subtractive manufacturing process that cuts, drills, mills, and scribes material with a focused laser beam without touching the workpiece, so there is no tool wear.

Laser mass spectrometry

Laser mass spectrometry is an umbrella term for mass spectrometry methods using lasers to desorb, ablate, or ionize samples, including MALDI, LIMS, and laser ablation ICP-MS.

Laser medicine

Laser medicine, also called laser therapy, is the use of lasers to diagnose and treat disease, most often by cutting, destroying, or coagulating tissue or activating light-sensitive drugs.

Laser Mégajoule

Laser Mégajoule (LMJ) is France's large inertial confinement fusion laser facility at CEA Cesta near Bordeaux, inaugurated in 2014 to help certify the nuclear deterrent without underground testing.

Laser melting deposition

Laser melting deposition is a metal additive manufacturing process in which a laser melts powder or wire onto a substrate to build dense layers for coatings, repair, and fabrication.

Laser metal deposition

Laser metal deposition (LMD) is an additive manufacturing process that uses a laser to melt metal powder or wire onto parts, building or repairing them layer by layer.

Laser micromachining

Laser micromachining is a manufacturing method that uses focused laser beams to remove material and fabricate microscale features such as holes, channels, and surface textures in metals, polymers, and ceramics.

Laser Mission

Laser Mission (1989), also released as Soldier of Fortune and Battle Dragon, is a West German-South African-US direct-to-video action film directed by BJ Davis, starring Brandon Lee as a CIA agent rescuing laser expert Ernest Borgnine from the KGB; it contains no lasers.

Laser peening

Laser peening is a surface treatment that uses laser-generated shock waves to leave deep compressive stress in metal, improving fatigue life and corrosion resistance in jet engine blades and landing gear.

Laser photocoagulation

Laser photocoagulation is an outpatient eye procedure in which a focused laser seals retinal leaks or destroys abnormal tissue, mainly treating diabetic retinopathy and retinal tears.

Laser pointer

A laser pointer, also called a laser pen, is a hand-held laser used to point during lectures, astronomy, and construction; US regulation limits visible output to 5 milliwatts.

Laser polishing of additively manufactured surfaces

Laser polishing of additively manufactured surfaces is a non-contact method in which a laser remelts a thin layer of a 3D-printed metal part, letting surface tension smooth roughness.

Laser powder bed fusion of bulk metallic glasses

Laser powder bed fusion of bulk metallic glasses is an additive manufacturing method that builds amorphous metal parts by laser-melting alloy powder layer by layer.

Laser printing

Laser printing is an electrophotographic process in which a laser writes an image onto a charged drum, which dry toner develops and heat fuses to paper.

Laser pyrolysis

Laser pyrolysis is a materials synthesis method that uses a CO2 laser to decompose gaseous or liquid precursors into high-purity nanoparticles, typically 5 to 30 nm.