edgepedia

Edgepedia

519,064 articles

CO2 fertilization effect

The CO2 fertilization effect is the boost to photosynthesis and plant growth from rising atmospheric carbon dioxide, which raised global plant carbon uptake about 13.5% between 1981 and 2020.

CO2 heat pump

A CO2 heat pump uses carbon dioxide (R744) as its refrigerant, running transcritical with heat rejected in a gas cooler rather than by condensation, and is best known through Japan's Eco Cute water heaters.

CO2 hydration

CO2 hydration: CO2 + H2O forming bicarbonate and a proton, also called carbonic anhydrase catalysis. Spontaneously slow; carbonic anhydrases accelerate it up to a million fold, and cyanobacteria couple it to NDH-1 electron transport via ChpX and ChpY.

CO2 hydrogenation to aromatics

CO2-to-aromatics tandem catalysis is a strategy that converts CO2 and hydrogen into aromatic hydrocarbons, chiefly benzene, toluene, and xylenes, by coupling a hydrogenation catalyst with an acidic zeolite.

CO2 hydrogenation to dimethyl ether

CO2 hydrogenation to dimethyl ether (DME) is a catalytic process converting carbon dioxide and hydrogen into DME, a clean fuel, hydrogen carrier, and LPG substitute.

CO2 hydrogenation to ethanol

CO2 hydrogenation to ethanol is a catalytic reaction converting carbon dioxide and hydrogen directly into ethanol, either thermocatalytically or electrocatalytically, as a carbon-recycling fuel route.

CO2 hydrogenation to formic acid

CO2 hydrogenation to formic acid is the catalytic reaction combining carbon dioxide and hydrogen to make formic acid, studied as a liquid, carbon-neutral hydrogen storage method.

CO2 hydrogenation to jet fuel

CO2 hydrogenation to jet fuel is a set of catalytic processes converting carbon dioxide and renewable hydrogen into C8–C16 hydrocarbons for sustainable aviation fuel, demonstrated at kiloton scale in China.

CO2 hydrogenation to light olefins

CO2 hydrogenation to light olefins is a catalytic process that converts carbon dioxide and hydrogen into ethylene, propylene, and butene, using CO2 as a renewable carbon feedstock.

CO2 hydrogenation to olefins

CO2 hydrogenation to olefins is a catalytic process that converts carbon dioxide and renewable hydrogen into light olefins such as ethene and propene, key platform chemicals for plastics.

CO2 hydrosilylation

CO2 hydrosilylation is the catalytic reduction of carbon dioxide with hydrosilanes, studied since 1981, that converts CO2 through formate, formaldehyde, and methanol levels using strong Si–O bond formation as the driving force.

CO2 injection

CO2 injection places carbon dioxide into subsurface reservoirs, used for enhanced oil recovery and for geologic carbon storage; the first commercial flood began at SACROC, Texas, in 1972.

CO2 laser therapy

CO2 laser therapy is a dermatologic and surgical treatment that uses a carbon dioxide laser to vaporize or resurface skin, treating acne scars, warts, wrinkles, and lesions.

CO2 mineralization in mine tailings

CO2 mineralization in mine tailings is the conversion of carbon dioxide into stable solid carbonate minerals in mine waste, a potential carbon storage method studied since the 1990s.

CO2 mineralization with industrial wastes

CO2 mineralization with industrial wastes is the reaction of carbon dioxide with alkaline residues such as steel slag, mine tailings, and ashes to form stable carbonate minerals, permanently storing CO2.

CO2-based polycarbonate polyols (cardyon)

CO2-based polycarbonate polyols (cardyon) are polyurethane components made by Covestro in Germany since 2016, in which up to 20 percent of the feedstock is CO2 instead of crude oil.

CO2-based polycarbonate polyols for polyurethane

CO2-based polycarbonate polyols are polyurethane raw materials made by copolymerizing carbon dioxide with epoxides; Covestro has produced them commercially at Dormagen, Germany, since 2016 for foams, adhesives, and coatings.

CO2-based polyols for polyurethane foams

CO2-based polyols for polyurethane foams are polyether-carbonate polyols made by copolymerizing captured CO2 with epoxides, chemically incorporating CO2 into the polymer, unlike CO2 used merely as a blowing agent.

CO2-cured concrete

CO2-cured concrete, also called carbonation-cured concrete, is concrete hardened by curing in a CO2-rich atmosphere instead of water, fixing CO2 as calcium carbonate and gaining early strength.

CO2-derived dimethyl carbonate synthesis

CO2-derived dimethyl carbonate synthesis is the direct one-step reaction of carbon dioxide with methanol to make dimethyl carbonate, a low-toxicity solvent and fuel additive, replacing hazardous phosgene routes.

CO2-derived polycarbonates

CO2-derived polycarbonates are aliphatic thermoplastic polymers made by copolymerizing carbon dioxide with epoxides, using CO2 instead of toxic phosgene; Inoue first reported the reaction in 1969.

CO2-equivalent

Carbon dioxide equivalent, abbreviated CO2e, is a unit expressing any greenhouse gas's emissions as the CO2 amount causing the same warming, using global warming potentials.

CO2-expanded liquids

CO2-expanded liquids (CXLs) are organic liquids into which compressed carbon dioxide is dissolved under pressure, tuning properties like solvent strength and viscosity for use in catalysis and separations.

CO2-switchable ionic liquids

CO2-switchable ionic liquids are liquid systems whose properties, such as polarity and viscosity, switch reversibly when carbon dioxide is added and removed, useful for separations and recycling.

CO2-switchable polymers and emulsions

CO2-switchable polymers are stimuli-responsive polymers that reversibly switch, typically from hydrophobic to hydrophilic, when carbon dioxide is added or removed; bubbling CO2 into switchable emulsions breaks them, and removing it re-forms them.

CO2-to-syngas

CO2-to-syngas refers to catalytic and electrochemical processes that convert carbon dioxide into synthesis gas, a mixture of carbon monoxide and hydrogen used to make methanol and liquid fuels.

CO2/epoxide copolymerization

CO2/epoxide copolymerization, also called ring-opening copolymerization (ROCOP), is a catalytic reaction that couples carbon dioxide with epoxides to form aliphatic polycarbonates, discovered by Shohei Inoue in 1969.

Co2MnGa

Co2MnGa is a ferromagnetic full-Heusler alloy classified as a magnetic Weyl semimetal, with giant room-temperature anomalous Hall and Nernst effects and uses in spintronics and terahertz devices.

Co3Sn2S2

Co3Sn2S2 is a cobalt-based shandite compound and leading magnetic Weyl semimetal whose cobalt atoms form a kagome lattice; it orders ferromagnetically below about 175 K.

CoA-binding

CoA-binding (InterPro IPR003781, SMART SM00881, Pfam PF02629) is a Rossmann-fold protein domain binding coenzyme A, found in succinyl-CoA synthetases, ATP-citrate ligases, and bacterial Rex repressors, mostly in bacteria.