18 articles
Burnable poison
A burnable poison, also called a burnable absorber, is a neutron-absorbing material loaded into a nuclear reactor core that depletes as fuel burns, letting designers load more fuel while keeping the core controllable.
Burnup
Burnup is a measure of the thermal energy produced by nuclear fission per unit mass of reactor fuel, typically expressed in gigawatt-days per tonne of uranium.
Critical power ratio
The critical power ratio (CPR) is a boiling water reactor safety parameter, defined as the ratio of a fuel bundle's critical power to its actual power.
Effective neutron multiplication factor
The effective neutron multiplication factor, written keff, measures neutrons produced per generation against those lost to absorption and leakage, deciding whether a chain reaction dies out, sustains itself, or grows.
Lattice physics calculation
A lattice physics calculation is a neutron transport and fuel depletion computation on a 2D fuel assembly slice, producing few-group cross sections for full-core reactor simulation.
Negative temperature feedback
Negative temperature feedback in a nuclear reactor is the inherent effect by which rising temperature lowers reactivity, so fission and heat output fall without any operator action.
Neutron flux
Neutron flux is defined as the number of neutrons crossing a unit area per time. This quantity is the central element in reactor physics linking population to reaction rates.
Neutron transport theory
Neutron transport theory is the branch of nuclear science that describes how neutrons move through matter, centered on the Boltzmann transport equation and nuclear reactor analysis.
Point kinetics equations
The point kinetics equations are a pair of coupled differential equations that model changes in a nuclear reactor's neutron population, treating the core as a single point.
Power coefficient of reactivity
The power coefficient of reactivity (PCR) is the change in a nuclear reactor's reactivity per percent change in power, summing the fuel temperature, moderator temperature, and void coefficients.
Resonance escape probability
Resonance escape probability is the probability that a fission neutron slows down through a fuel's resonance energy region without being captured, denoted p in reactor physics.
Shutdown margin
Shutdown margin is the reactivity by which a nuclear reactor is, or would be, subcritical, assuming all control rods inserted except the highest-worth rod, which is assumed stuck withdrawn.
Six-factor formula
The six-factor formula is an equation in nuclear reactor physics that gives a thermal reactor's effective multiplication factor as the product of six factors covering a neutron generation's life cycle.
Soluble boron
Soluble boron, called chemical shim or a soluble poison, is boric acid dissolved in a pressurized water reactor's coolant to absorb neutrons and control core reactivity, reducing reliance on control rods.
Temperature coefficient of reactivity
The temperature coefficient of reactivity is the change in a nuclear reactor's reactivity per degree of core temperature change; a negative value makes the reactor self-regulating.
Thermal-hydraulic analysis
Thermal-hydraulic analysis is the engineering discipline modeling fluid flow, heat transfer, and their interaction with structures in nuclear reactors, mainly through computer codes like TRACE and RELAP5.
Void coefficient
The void coefficient of reactivity is the rate at which steam bubbles forming in a reactor's coolant change its reactivity, a key factor in reactor safety.
Xenon-135
Xenon-135 is a radioactive xenon isotope produced in nuclear fission whose enormous neutron absorption cross section makes it the most consequential neutron poison in reactor operation.