18 articles
Acidizing
Acidizing is a well-stimulation technique that pumps acid, usually hydrochloric acid, into a well or reservoir formation to dissolve flow-restricting material and improve production, first patented in 1896.
Coiled tubing
Coiled tubing is a continuous, jointless steel pipe spooled on a reel and pushed into live oil or gas wells by an injector head for intervention without a workover rig.
Expandable tubulars
Expandable tubulars are steel pipes and liners that are mechanically expanded in situ after being run into an oil or gas wellbore, keeping downhole size for zonal isolation and casing repair.
Frac pack
A frac pack is a well completion combining hydraulic fracturing with gravel packing in one operation, for sand control and stimulation, first used in the Gulf of Mexico in the early 1980s.
Gas lift
Gas lift is an artificial lift method for oil and gas wells in which high-pressure gas is injected into the tubing to lighten the fluid column.
Gravel pack
A gravel pack is a sand-control well completion method in which gravel packed around a screen filters formation sand while letting oil and gas flow, used since the 1930s.
Packer (oil well tool)
A packer is a downhole device that expands to seal the wellbore annulus in oil and gas wells, isolating zones for controlled production, injection, or treatment.
Plug and abandonment
Plug and abandonment (P&A) is the permanent sealing of a well no longer viable for production, using cement or mechanical plugs to stop reservoir fluids contaminating aquifers.
Polymer flooding
Polymer flooding is an enhanced oil recovery method that thickens injection water with polymers like HPAM, improving sweep efficiency; China's Daqing oilfield is its largest application.
Production logging
Production logging is the set of downhole measurements, run in a producing or injecting well with the well flowing, that shows which zones contribute flow, where water or gas enters, and where leaks or channels exist.
Slickline
Slickline is a single-strand, nonelectric steel wire spooled from a surface winch that runs, retrieves, and actuates downhole tools in live oil and gas wells without a workover rig.
Squeeze cementing
Squeeze cementing is a remedial well operation in which cement slurry is pressured into perforations, leaks, and annular channels, dehydrating to form a solid seal.
Squeeze plug (wellbore)
A squeeze plug is a volume of cement forced under pressure into a wellbore's perforations or channels to seal off fluid flow, a remedial technique introduced in the 1930s.
Subsea production tree
A subsea production tree, or wet Christmas tree, is an assembly of valves on a seabed wellhead that controls flow from a subsea oil or gas well.
Subsea wellhead
A subsea wellhead is a set of pressure-containing housings, hangers, and seals installed on the seabed, suspending casing and supporting the blowout preventer during drilling.
Sucker rod pump
A sucker rod pump, also called a beam pump, is an artificial-lift system that drives a downhole pump through a rod string, lifting oil from over 600,000 wells.
Water shut-off
Water shut-off is a set of petroleum-engineering treatments, mechanical or chemical, that reduce or stop unwanted water production from an oil or gas well, or divert injected water.
Workover
A workover is a maintenance operation on a completed oil or gas well to restore or increase production, typically requiring the well to be killed.