# Eli Sternberg

**Eli Sternberg** He was known for results in viscoelasticity, conservation laws in elastostatics, and the analysis of stress fields near crack tips.<sup>[1](https://www.amacad.org/person/eli-sternberg)</sup><sup> • </sup><sup>[2](https://prabook.com/web/eli.sternberg/3690109)</sup> 

| Key facts | |
| --- | --- |
| Born | November 13, 1917, Vienna<sup>[2](https://prabook.com/web/eli.sternberg/3690109)</sup> |
| Died | 1988<sup>[1](https://www.amacad.org/person/eli-sternberg)</sup> |
| Doctorate | Ph.D., Illinois Institute of Technology, 1945, under Michael Alexander Sadowsky<sup>[3](https://www.genealogy.math.ndsu.nodak.edu/id.php?id=13680)</sup> |
| Signature work | Conservation laws in linearized and finite elastostatics (Archive for Rational Mechanics and Analysis, 1972); failure-of-ellipticity analyses of finite elastostatics (1977–1978)<sup>[4](https://portal.mardi4nfdi.de/wiki/Person:759505)</sup> |

## Career

A visiting professorship in Delft, Netherlands, followed in 1956–1957, and he then moved to [Brown University](https://www.edgepedia.org/brown-university) as professor from 1957 to 1964. His 1960 paper *On the integration of the equations of motion in the classical theory of elasticity*, published in Archive for Rational Mechanics and Analysis, carries a Brown University affiliation.<sup>[2](https://prabook.com/web/eli.sternberg/3690109)</sup><sup> • </sup><sup>[6](https://doi.org/10.1007/bf00276152)</sup>

A 1968 work identifies him as Professor in Caltech's Division of Engineering and Applied Science in Pasadena.<sup>[7](https://id.loc.gov/authorities/names/no2001072066.html)</sup> At Caltech he taught the course AM 135 and refined its lecture notes over many years; he planned to publish them but did not consider them ready in his lifetime. The notes were later made publicly available with the agreement of his son Peter Sternberg.<sup>[8](https://imechanica.org/sites/default/files/0.%20Preface%20by%20Kaushik%20Bhattacharya.pdf)</sup>

## Representative work

His dissertation topic, a second-order nonlinear stress-strain theory that retains infinitesimal deformations while replacing [Hooke's law](https://www.edgepedia.org/hookes-law), revealed second-order effects in uniaxial tension, compression, and torsion of circular cylinders that earlier linearization had missed.<sup>[9](https://doi.org/10.1115/1.4009515)</sup>

He also analyzed singular and large-deformation fields: *Finite-deformation analysis of the elastostatic field near the tip of a crack: Reconsideration and higher-order results* (Journal of Elasticity, 1974) and *Large deformations near a tip of an interface-crack between two Neo-Hookean sheets* (Journal of Elasticity, 1983).<sup>[4](https://portal.mardi4nfdi.de/wiki/Person:759505)</sup>

In his papers on ellipticity, he gave necessary and sufficient conditions, expressed through local principal stretches, under which the equations for finite plane equilibrium deformations of a compressible hyperelastic solid possess ordinary and strong ellipticity.<sup>[10](https://authors.library.caltech.edu/records/w899t-6fd45)</sup> In a related study he demonstrated that the displacement equations of equilibrium are elliptic only when the principal stretches lie within suitable limits, and that ellipticity fails at a local state of uniaxial tension or compression of sufficiently severe intensity; difficulties in determining deformations and stresses near a crack tip in such a material motivated this study.<sup>[11](https://authors.library.caltech.edu/records/nk1zw-ftj31)</sup> Related papers appeared in 1977 and 1978 on the failure of ellipticity and the emergence of discontinuous deformation gradients in plane finite elastostatics.<sup>[4](https://portal.mardi4nfdi.de/wiki/Person:759505)</sup>

According to the MaRDI portal, he also worked on Saint-Venant's principle, publishing on torsion of solids of revolution (1966) and on torsion and the plane problem of elastostatics for multiply connected domains (1984), and on three-dimensional stress concentration around a cylindrical hole in a semi-infinite elastic body (Journal of Applied Mechanics, 1966).<sup>[4](https://portal.mardi4nfdi.de/wiki/Person:759505)</sup> A technical report, *On Singular Problems in Linearized and Finite Elastostatics*, compared the predictions of linear elasticity theory for singular equilibrium problems with studies in finite elastostatics, including problems with no counterpart in the linearized theory.<sup>[12](http://oai.dtic.mil/oai/oai?identifier=ADA091298&metadataPrefix=html&verb=getRecord)</sup>

## Honors

The [American Society of Mechanical Engineers](https://www.edgepedia.org/american-society-of-mechanical-engineers) awarded Sternberg the [Timoshenko Medal](https://www.edgepedia.org/timoshenko-medal) in 1985; he delivered an acceptance speech titled *Rumination of a Reclusive Elastician* at the Applied Mechanics Dinner of the 1985 ASME Annual Meeting in [Miami Beach, Florida](https://www.edgepedia.org/miami-beach-florida).<sup>[5](https://imechanica.egr.uh.edu/node/182)</sup> He was elected to the American Academy of Arts and Sciences in 1959, in the Mathematical and Physical Sciences and Engineering and Technology classes,<sup>[1](https://www.amacad.org/person/eli-sternberg)</sup> and was a member of the National Academy of Engineering and the National Academy of Sciences.<sup>[2](https://prabook.com/web/eli.sternberg/3690109)</sup> 

## How later research used his results

The conservation-law line of work has remained in active use. According to a 2026 Journal of Elasticity paper on configurational forces, the work co-authored by Sternberg carried forward the development initiated with Eshelby-type integrals, interpreting them as conservation laws tied to applications of [Noether's theorem](https://www.edgepedia.org/noethers-theorem), and it introduced the additional L- and M-integrals tied to rotational and dilatational configurational changes. That paper also treats the J-, L-, and M-integrals as canonical examples within a new defect-map formulation.<sup>[13](https://link.springer.com/article/10.1007/s10659-026-10222-3)</sup> The crack-tip motivation behind the ellipticity analyses, in turn, ties that work to fracture mechanics, where stress fields near crack tips remain a central problem.<sup>[11](https://authors.library.caltech.edu/records/nk1zw-ftj31)</sup>

## References

1. Eli Sternberg, American Academy of Arts and Sciences. https://www.amacad.org/person/eli-sternberg
2. Eli Sternberg, Prabook biographical record. https://prabook.com/web/eli.sternberg/3690109
3. Eli Sternberg, The Mathematics Genealogy Project. https://www.genealogy.math.ndsu.nodak.edu/id.php?id=13680
4. Eli Sternberg, MaRDI portal (zbMATH publication list). https://portal.mardi4nfdi.de/wiki/Person:759505
5. 1985 Timoshenko Medal Acceptance Speech by Eli Sternberg, iMechanica. https://imechanica.egr.uh.edu/node/182
6. On the integration of the equations of motion in the classical theory of elasticity, Archive for Rational Mechanics and Analysis. https://doi.org/10.1007/bf00276152
7. Sternberg, Eli, 1917-, Library of Congress authority record. https://id.loc.gov/authorities/names/no2001072066.html
8. Preface to Sternberg's AM 135 lecture notes, iMechanica. https://imechanica.org/sites/default/files/0.%20Preface%20by%20Kaushik%20Bhattacharya.pdf
9. Nonlinear Theory of Elasticity With Small Deformations, ASME. https://doi.org/10.1115/1.4009515
10. On the failure of ellipticity of the equations for finite elastostatic plane strain, Caltech Authors. https://authors.library.caltech.edu/records/w899t-6fd45
11. On the ellipticity of the equations of nonlinear elastostatics for a special material, Caltech Authors. https://authors.library.caltech.edu/records/nk1zw-ftj31
12. On Singular Problems in Linearized and Finite Elastostatics, DTIC record. http://oai.dtic.mil/oai/oai?identifier=ADA091298&metadataPrefix=html&verb=getRecord
13. A Unified Configurational Framework for Interface and Bulk Defects in Eshelbian Linear Elasticity, Journal of Elasticity, 2026. https://link.springer.com/article/10.1007/s10659-026-10222-3

---
*Topic: Encyclopedia › Technology and the built world › Engineers and computer scientists › Engineers and materials scientists › Researchers in mechanical and aerospace engineering, robotics, and control › Solid Mechanics and Materials*

*Initially written Sep 21, 2026 · Reviewed: Sep 25, 2026 · Edited: Sep 25, 2026; Oct 15, 2026; Oct 25, 2026 · Last review: Sep 25, 2026*

*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*

License: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license
