Iciniacum
Iciniacum was a Roman cavalry-and-infantry fort on the Upper Germanic-Raetian Limes, located about 500 m northwest of the present village of Theilenhofen in the Weißenburg-Gunzenhausen district of Bavaria, Germany.1 The ancient name is preserved in the Tabula Peutingeriana, the only surviving Roman map.2
| Key fact | Detail |
|---|---|
| Ancient name | Iciniacum, attested in the Tabula Peutingeriana2 |
| Location | Ca. 500 m northwest of Theilenhofen, on a plateau about 90 m above the Altmühl River, about 2.2 km south of the Limes3 |
| Construction phases | First wooden fortification around AD 100; stone rebuilding in the middle of the 2nd century (Hadrianic-Antonine period)2 |
| Garrison | Cohors III Bracaraugustanorum equitata, a mixed unit of infantry and cavalry, until the 3rd century2 |
| Size of stone fort | 196 × 140 m, roughly 2.4 to 2.7 hectares, oriented with its front toward the Limes in the north4 • 5 |
| Estimated strength | About 500 soldiers including riders, based on ten barrack subdivisions (six centuries and four turmae)3 |
| End of the fort | Destroyed and abandoned around AD 254, in the collapse of the Limes2 |
| Modern investigation | Excavation since 1878 (Reichs-Limes-Kommission); large-scale magnetometry from 20073 |
Location and setting
The fort occupies a shallow hollow on a high plateau that rises about 90 m above the Altmühl valley, roughly 2.2 km from the frontier line itself.3 The position was chosen for its sightlines: the view is open in every direction, and toward the north, across the Pfofeld valley, the whole course of the Limes from the Burgstall near Gunzenhausen to south of Thannhausen was visible, so that signals from nine to ten watchtowers could be seen from the fort.4 The garrison's task was to guard the northernmost section of the Raetian Limes.4
Garrison
Its presence was first established in 1879, when excavation of the porta principalis sinistra, the west gate, produced a brick stamped with the initials C III BR.3
Magnetometry of the barrack blocks identified ten subdivisions, six centuries and four turmae, supporting a strength of about 500 men including riders for the cohors III Bracaraugustanorum equitata.3
Fort and buildings
The first fort on the site was a timber-earth structure built around AD 100, probably replacing the nearby fort at Munningen; the stone rebuilding followed in the middle of the 2nd century.2 • 5 The stone fort measured 196 × 140 m, and its praetorial front faced north toward the Limes. The Roman long-distance road from Weißenburg ran directly to the east gate (porta principalis dextra), while the west gate pointed toward the fort at Gnotzheim.4
The fortifications and interior follow the standard Roman scheme. Magnetometry, however, shows the wall enclosed by three ditches, with the outer and inner ditches running all around and the middle ditch broken at the entrances; the northern entrance proved to be a double entrance.3 A water canal traced in the magnetogram ran from the principia through the ditches toward the Roman bath west of the fort.3
West of the stone fort, aerial archaeology revealed in 1976 a timber-earth camp of about 155 × 130 m (measured as 160 × 142 m in the magnetometry report), which may have been the construction camp for the stone fort.5 • 3
Vicus and end of the settlement
Geomagnetic prospection in the vicus identified a half-round timber-earth structure about 70 m in diameter, interpreted as the remains of a stage theater.6 Since spring 2010 the University of Kiel has prospected more than thirty hectares of the vicus area.7
Research places the fort's end with the fall of the Limes: the fortress was destroyed and abandoned around AD 254, and the German-language archaeological literature likewise assumes the fort perished with the Limes collapse around 260.2
Modern investigation
Walls of the fort still stood several feet above ground in the 17th century, according to the research of Heinrich Eidam, the Reichs-Limes-Kommission's Streckenkommissar who began work at the site in 1878; farmers removed the remaining stonework in the following decades.4 Amateur digging began in 1820, the western wall was traced for 87 m in 1879, and further gates and wall sections were uncovered in 1884.3 • 4
Magnetometry transformed the site plan. Large-scale caesium magnetometer survey from autumn 2007, combined with the old Reichs-Limes-Kommission excavation maps, produced a complete ground plan of the fort, its ditches, water supply, and barracks, and allowed the troop level to be calculated without excavation.3 The strong magnetic contrast results partly from the fort's destruction by fire, which magnetically enhanced the topsoil over the limestone foundations.3 Because the remains lie only 40 to 150 cm deep and the site is regularly accessible grassland, Theilenhofen has served as a standard test site for new prospection technologies, including drone-based ground-penetrating radar and drone-based magnetometry.2
References
- Pleiades, Old Indexes of places: Roman, early Empire (30 BC–AD 300), entry for Iciniacum
- Testing the Applicability of Drone-Based Ground-Penetrating Radar for Archaeological Prospection, Remote Sensing 17(9), 1498 (2025)
- J. W. E. Fassbinder (2010), Geophysical prospection of the frontiers of the Roman Empire in southern Germany, UNESCO World Heritage Site, Archaeological Prospection 17, 129–139
- J. W. E. Fassbinder (2008), Magnetometerprospektion am Kastell Iciniacum bei Theilenhofen, Landkreis Weißenburg-Gunzenhausen, Mittelfranken
- Deutsche Limeskommission: 50. Kastell Theilenhofen
- Theilenhofen, theatrum.de
- Der Limes 6/2012, Heft 2: Kastell Theilenhofen, Deutsche Limeskommission
Topic: Encyclopedia › Places and geography › Parks, protected areas, and geographic heritage sites › Archaeological sites and site complexes › Greek, Roman, and Etruscan archaeological sites › Roman roads and bridges › Bridges and aqueducts
Initially written Oct 21, 2026 · Edited: Oct 25, 2026
Your notes
© 2026 EdgeChat AI, a subsidiary of Biostate AI. Free to use with credit under the Edgepedia Community License. Developers: read Edgepedia by API or MCP. Embed a reference card.