# Joint cost
A joint cost is the cost of a single production process that yields multiple products simultaneously, incurred before the products become separately identifiable at the split-off point.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) Classic examples include crude oil refining, dairy processing that splits raw milk into cream and skim milk, and lumber milling that yields boards and wood chips. Because no part of the input can be traced to one output rather than another, joint costs must be allocated by formula for inventory valuation, and accountants broadly agree that the allocation is arbitrary and must not drive operating decisions.[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf)
| Key fact | Detail |
|---|---|
| Definition | Cost of a single production process yielding multiple products simultaneously; the split-off point is when the products become separately identifiable[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) |
| Main allocation methods | Physical measure; sales value at split-off; net realizable value (NRV); constant gross-margin percentage NRV[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) |
| Decision rule | Sell-or-process-further decisions use incremental revenue minus incremental cost; joint costs are irrelevant because they are the same either way[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) |
| IFRS requirement | IAS 2 paragraph 14: joint conversion costs allocated on a rational and consistent basis, for example relative sales value; no specific method mandated[3](https://www.prepi.to/en/articles/joint-cost-allocation-and-by-products) |
| Byproducts under IAS 2 | Immaterial byproducts often measured at net realizable value, deducted from the main product's cost[4](https://www.ifrs.org/content/dam/ifrs/publications/html-standards/english/2026/issued/ias2.html) |
| Arbitrariness | Apportionment is arbitrary whichever method is used, and is required only for inventory valuation, not for viability decisions[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf) |
| Worked magnitude | Farmers' Dairy: $400,000 of joint costs on 110,000 gallons of raw milk, yielding 25,000 gallons of cream and 75,000 gallons of liquid skim[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) |
## Definition and boundaries
**Joint, common, separable, fixed.** Joint products are not separately identifiable until a certain stage is reached in processing; this stage is the split-off point, and costs incurred prior to it are common costs.[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf) The dairy illustration is the standard one: the split-off point is where milk becomes skim milk and cream.[5](https://ips.unwe.bg/Uploads/Alternatives/deevski_br1_2016-6.pdf) Separable costs are all costs incurred beyond the split-off point that can be assigned to each product identified there.[5](https://ips.unwe.bg/Uploads/Alternatives/deevski_br1_2016-6.pdf) Costs incurred beyond the split-off point that can be assigned to an identified product are product-specific costs borne by that product.[6](https://shop.igpinstitute.org/insight/wp-content/uploads/2025/06/Chapter-11-Joint-Products-and-By-Products.pdf)
The defining feature of a joint cost is that the outputs emerge together from one process with high sales values at split-off, whereas a byproduct has a low sales value relative to the joint or main products.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
## Where joint costs arise
Joint costs appear wherever one input splits into several saleable outputs. The textbook examples are dairy processing (cream and liquid skim from raw milk), lumber milling (fine-grade lumber and wood chips), and oil refining, where a Brazilian teaching case on Refinaria Fluminense S.A. examines processes with multiple split-off points.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) • [7](https://repec.org.br/repec/article/download/1536/1252) In the [Westlake Corporation](https://www.edgepedia.org/westlake-corporation) lumber example, fine-grade lumber as the main product sells for $6 per board foot and wood chips as the byproduct for $1 per cubic foot, against July 2012 joint manufacturing costs of $250,000 ($150,000 direct materials and $100,000 conversion).[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
## Allocation methods
The methods fall into two families. Physical measures allocate by tangible attributes such as pounds, gallons, or barrels; market-based methods allocate using dollar data: sales value at split-off, net realizable value, and constant gross-margin percentage NRV.[8](https://scholar.cu.edu.eg/sites/default/files/ch16_lecture.pdf) The two main methods of apportioning common process costs at the split-off point are physical measurement (weight or volume) of output and market value (sales or net realizable value) of output.[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf) The physical-measure method assumes the joint products are capable of being measured in the same units, apportioning on a base such as weight or numbers.[6](https://shop.igpinstitute.org/insight/wp-content/uploads/2025/06/Chapter-11-Joint-Products-and-By-Products.pdf) Indian practice lists physical units, net realizable value at split-off, and technical estimates.[6](https://shop.igpinstitute.org/insight/wp-content/uploads/2025/06/Chapter-11-Joint-Products-and-By-Products.pdf) Apportionment is always made on units produced, never on units sold.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/)
**Worked example, same numbers.** In May 2012, Farmers' Dairy processes 110,000 gallons of raw milk; 10,000 gallons are lost to evaporation and spillage, yielding 25,000 gallons of cream and 75,000 gallons of liquid skim, with $400,000 of joint costs.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) Under the sales value at split-off method, the gross-margin percentage for each product is identical at 20%, because joint costs are allocated in proportion to the sales value of total production.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) The same property holds generally: market value apportionment produces the same gross profit percentage margin for each product at the split-off point.[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf) The NRV method is used where there is no market at the split-off point, allocating by final sales value minus further processing costs.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/) The constant gross-margin percentage NRV method works backward from a uniform target margin, and is the only joint-cost allocation method under which products may receive negative allocations.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
None of the three market bases is more correct than the others; they differ only in how they spread a cost that cannot be traced, and the choice changes each product's reported profit without changing the total.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/)
## Byproducts and scrap
A byproduct is not given a share of joint cost. In the deduct-from-cost treatment, byproduct proceeds are deducted from the joint costs of the process so only the net cost is shared between the joint products; no profit is reported on the byproduct. An alternative treatment credits proceeds to sales revenue as other income, leaving joint cost unreduced.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/)
The timing of recognition also differs. The production method recognizes byproducts in the financial statements at the time production is completed, offsetting their NRV against main-product costs; the sales method delays recognition until the time of sale. The production method is conceptually superior, but the sales method is often used in practice because dollar amounts of byproducts are immaterial.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) The sales method carries a control consequence: managers may store byproducts for several periods and give revenues and income a "small boost" by selling byproducts accumulated over several periods when revenues and profits from the main product or joint products are low.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
## Decision relevance and pitfalls
**Allocated costs are not decision costs.** Joint costs and how they are allocated are irrelevant in deciding whether to process further, because joint costs are the same regardless of whether further processing occurs.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) For a sell-or-process-further decision made at the split-off point, joint costs incurred before it are sunk costs, and the allocation is simply a formula with no bearing on the value of the product to which it assigns a cost; allocated costs should therefore have no bearing on pricing.[10](https://www.accountingtools.com/articles/by-product-costing-and-joint-product-costing) The correct analysis compares incremental revenue, the final sales value after further processing less the sales value at the split-off point, with the incremental cost of processing further.[2](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf)
The dairy numbers show the method. Further processing cream into buttercream adds incremental revenues of $300,000 against incremental costs of $280,000, a gain of $20,000 in operating income; further processing liquid skim into condensed milk adds $800,000 of incremental revenues against $520,000 of costs, a gain of $280,000.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf) In a refining example, further processing loses $1,000, so product P should be sold at the split-off point; the $14,000 of apportioned joint cost appears nowhere in the calculation because it is incurred whether P is refined or not.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/) In the Oregon Lumber example, additional revenue of $0.15 per board foot ($0.45 finished price minus $0.30 unfinished price) exceeds the additional $0.05 per board foot processing cost, so profit increases $0.10 per board foot by processing Grade B lumber further.[11](https://saylordotorg.github.io/text_managerial-accounting/s11-10-appendix-making-decisions-invo.html) Not all separable costs are incremental: fixed costs that do not change with the decision, sunk costs such as depreciation on further-processing equipment, and allocated corporate costs should be excluded from the comparison.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
**Distorted margins.** The physical units basis can make a low-priced product report a loss it can do nothing about, while the sales value basis gives every product the same gross margin percentage.[9](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/) Market-based allocation also reverses the usual pricing logic: selling prices of joint products drive the joint-cost allocations, rather than cost allocations serving as the basis for pricing.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
## By the numbers
- $400,000 of joint costs on 110,000 gallons of raw milk, producing 25,000 gallons of cream and 75,000 gallons of liquid skim after 10,000 gallons of loss.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
- A uniform 20% gross margin for both dairy products under sales value at split-off allocation.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
- $20,000 and $280,000 of operating-income gains from further processing cream and liquid skim respectively.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
- A SAR 81,000 range in allocated inventory across methods in an oil-refining example, which reverses when the product is sold: sales of SAR 1,880,000 and costs of SAR 1,100,000 are identical under every method, so cash does not move.[3](https://www.prepi.to/en/articles/joint-cost-allocation-and-by-products)
- $6 per board foot for fine-grade lumber versus $1 per cubic foot for wood chips, with $250,000 of joint manufacturing costs.[1](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
- $0.10 per board foot of added profit from processing Grade B lumber further ($0.15 added revenue less $0.05 added cost).[11](https://saylordotorg.github.io/text_managerial-accounting/s11-10-appendix-making-decisions-invo.html)
## Standards: IFRS, US GAAP and beyond
IAS 2 covers joint costs in paragraph 14, under costs of conversion: where a process yields joint products, or a main product and a byproduct, and each one's conversion costs are not separately identifiable, they are allocated on a rational and consistent basis, with relative sales value given as the example; no specific method is required.[3](https://www.prepi.to/en/articles/joint-cost-allocation-and-by-products) For byproducts, IAS 2 states that when byproducts are immaterial, as most are by their nature, they are often measured at net realizable value and this value is deducted from the cost of the main product.[4](https://www.ifrs.org/content/dam/ifrs/publications/html-standards/english/2026/issued/ias2.html) India's Ind AS 2 carries the same requirement, allocating between products on a rational and consistent basis, for example on relative sales value.[12](https://www.cmaknowledge.in/2025/03/cost-accounting-standard-cas-19-joint-costs.html)
US GAAP does not prescribe a joint-cost method. The basis of accounting for inventory under ASC 330 is cost, generally the sum of direct and indirect expenditures and charges incurred to bring inventory to its existing condition and location.[13](https://kpmg.com/kpmg-us/content/dam/kpmg/frv/pdf/2025/inventory.pdf) ASC 330 defines net realizable value as the estimated selling price in the ordinary course of business less reasonably predictable costs of completion, disposal, and transportation.[14](https://viewpoint.pwc.com/dt/us/en/pwc/accounting_guides/inventory/assets/ivguide0425.pdf) India's cost accounting standard CAS-19 defines NRV as expected final selling price minus estimated further processing costs minus estimated selling and distribution expenses, and allocates joint costs in proportion to each product's NRV.[12](https://www.cmaknowledge.in/2025/03/cost-accounting-standard-cas-19-joint-costs.html)
## References
1. [Horngren et al., Cost Accounting, Chapter 16: Cost Allocation – Joint Products and Byproducts](https://nscpolteksby.ac.id/ebook/files/Ebook/Accounting/Cost%20Accounting%20(2012)/Chapter16%20-%20Cost%20Allocation%20Joint%20Products%20and%20Byproducts.pdf)
2. [ACCA: Process costing – joint products (November 2012)](https://www.accaglobal.com/content/dam/acca/global/PDF-students/2012s/sa_nov12_ma1_2v2_joint_v2.pdf)
3. [Joint Cost Allocation Methods and By-Product Accounting, Prepi](https://www.prepi.to/en/articles/joint-cost-allocation-and-by-products)
4. [International Accounting Standard 2 Inventories (IASB, 2026 issued text)](https://www.ifrs.org/content/dam/ifrs/publications/html-standards/english/2026/issued/ias2.html)
5. [Cost Allocation Methods for Joint Products and By-products, University of National and World Economy, Bulgaria (2016)](https://ips.unwe.bg/Uploads/Alternatives/deevski_br1_2016-6.pdf)
6. [Cost and Management Accounting-II, Chapter 11: Joint Products and By-Products (ICMAI/IGP material)](https://shop.igpinstitute.org/insight/wp-content/uploads/2025/06/Chapter-11-Joint-Products-and-By-Products.pdf)
7. [Teaching Case: The Allocation of Joint Costs in Processes with Multiple Splitoff Points at Refinaria Fluminense S. A.](https://repec.org.br/repec/article/download/1536/1252)
8. [Chapter 16 lecture slides: Cost Allocation, Cairo University](https://scholar.cu.edu.eg/sites/default/files/ch16_lecture.pdf)
9. [CIMA P1 Management Accounting Notes: Joint Product Costing, OpenTuition](https://opentuition.com/cima/cima-p1/notes/cima-p1-6-joint-product-costing/)
10. [By-product costing and joint product costing, AccountingTools](https://www.accountingtools.com/articles/by-product-costing-and-joint-product-costing)
11. [Making Decisions Involving Joint Costs, Managerial Accounting (Saylor)](https://saylordotorg.github.io/text_managerial-accounting/s11-10-appendix-making-decisions-invo.html)
12. [Cost Accounting Standard (CAS-19): Joint Costs, CMA Knowledge (March 2025)](https://www.cmaknowledge.in/2025/03/cost-accounting-standard-cas-19-joint-costs.html)
13. [KPMG Handbook: Inventory (2025)](https://kpmg.com/kpmg-us/content/dam/kpmg/frv/pdf/2025/inventory.pdf)
14. [PwC Viewpoint Inventory Guide (ASC 330)](https://viewpoint.pwc.com/dt/us/en/pwc/accounting_guides/inventory/assets/ivguide0425.pdf)
---
*Topic: Encyclopedia › Society and history › Economics and business › Business and work › Cost and management accounting*
*Initially written Oct 10, 2026 · Edited: Oct 11, 2026; Oct 15, 2026*
*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*
License: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license