# Wolfgang Heiß
**Wolfgang Heiß** (Wolfgang Heiss) is a materials scientist who holds the professorship for materials science, solution-processed semiconductor materials, at Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) and heads the Solution-Processed-Semiconductor-Materials (SOPSEM) group at the Energy Campus Nürnberg.[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) • [2](https://cris.fau.de/persons/101486134/publications) His field is materials chemistry: the synthesis of colloidal semiconductor nanocrystals and metal-halide perovskites and their use in optoelectronic devices, most prominently X-ray detectors.[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/)
| Key fact | Detail |
|---|---|
| Current position | Professor of materials science (solution-processed semiconductor materials), FAU Erlangen-Nürnberg; head of the SOPSEM group at Energy Campus Nürnberg[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) • [2](https://cris.fau.de/persons/101486134/publications) |
| Field | Materials chemistry: colloidal nanocrystals and metal-halide perovskites for optoelectronics[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) |
| Signature work | "Detection of X-ray photons by solution-processed lead halide perovskites", *Nature Photonics*, 2015[3](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html) |
| Earlier career | Principal investigator, Department of Solid State Physics, Johannes Kepler University Linz, project running December 2003 to May 2004; active there on PbS nanocrystal photovoltaics through at least 2011[4](https://research.jku.at/en/projects/development-and-improvement-of-novel-electro-optical-nano-devices/) • [5](https://research.jku.at/en/activities/pbs-nanocrystal-based-photovoltaics-for-infrared-imaging-and-sola/) |
| Spin-off | Amperial Windows Technologies, founded in 2023 by a member of his group[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) |
| ORCID | 0000-0003-0430-9550[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) |
## Career
Heiß worked at the Department of Solid State Physics of Johannes Kepler University (JKU) Linz, where he was principal investigator of a finished project on electro-optical nano-devices based on lead chalcogenides running from 1 December 2003 to 31 May 2004.[4](https://research.jku.at/en/projects/development-and-improvement-of-novel-electro-optical-nano-devices/) He remained in the Linz department through the following decade: in March 2011 he spoke there on PbS nanocrystal photovoltaics for infrared imaging and solar cells at the 23rd Workshop on Quantum Solar Energy Conversion in Austria.[5](https://research.jku.at/en/activities/pbs-nanocrystal-based-photovoltaics-for-infrared-imaging-and-sola/) His Linz laboratory also trained doctoral researchers; the Institute of Solid State Physics at JKU hosted doctoral studies there from 2004 to 2007 under his supervision.[6](https://www.chimia.ch/chimia/article/download/2017_461/952/11607)
He now holds the FAU professorship for materials science focused on solution-processed semiconductor materials.[2](https://cris.fau.de/persons/101486134/publications) The SOPSEM group works in two material classes. It synthesizes colloidal nanocrystals of inorganic semiconductors and metal oxides in organic solvents for electronic devices and photonics, and it develops metal-halide perovskites as solution-epitaxial microcrystals and films, single crystals, heterostructures, and polycrystalline wafers, with applications in lasing, X-ray detection, and energy harvesting.[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/)
## Representative work
In "Detection of X-ray photons by solution-processed lead halide perovskites", solution-processed photodiodes and photoconductors reached an X-ray sensitivity up to \(25\,\mu\mathrm{C}\,\mathrm{mGy}_{\mathrm{air}}^{-1}\,\mathrm{cm}^{-3}\) and a responsivity of \(1.9 \times 10^{4}\) carriers per photon, values comparable to the solid-state technology then in use.[3](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html) The paper was published in July 2015 in volume 9, pages 444–449.[3](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html) A follow-up 2016 *Nature Photonics* commentary he co-authored framed perovskite single crystals as a platform for cheap and sensitive X-ray detectors.[7](https://www.nature.com/articles/nphoton.2016.54) His 2015 review ["Prospects of Nanoscience with Nanocrystals"](https://doi.org/10.1021/nn506223h) appeared in *ACS Nano*.
## How perovskite X-ray detection works
Direct-type detectors ionize the detecting material with high-energy radiation, generating charge carriers that circulate to form the electrical signal; indirect-type detectors instead use a scintillator to convert X-rays into visible photons that a photodiode then reads out.[8](https://pubs.acs.org/doi/full/10.1021/acsenergylett.0c02430) Lead halide perovskites fit the direct route because their heavy Pb and I atoms give a high X-ray absorption cross-section, and because their carrier mobility is significantly higher than any other low-temperature solution-processed semiconductor, producing a fast photoresponse.[3](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html) • [9](https://www.nature.com/articles/nphoton.2017.94) The sintered MAPbI3 wafer detectors of 2017 showed an ambipolar mobility–lifetime product of 2×10−4 cm2 V−1, suggested to account for their exceptionally high sensitivity.[9](https://www.nature.com/articles/nphoton.2017.94)
## How it compares with established detectors
Combined with a thin-film transistor, a-Se enables digital mammography below 35 keV, but its application range is limited by its low performance.[3](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html) • [10](https://pubs.rsc.org/en/content/articlehtml/2023/cc/d3cc00969f) Against a-Se, perovskite direct detectors later exceeded sensitivity by more than three orders of magnitude (\(1.2 \times 10^{5}\) versus \(20\ \mu\mathrm{C\ Gy_{air}^{-1}\ cm^{-2}}\)) and reached a lowest detectable dose rate of \(0.64\ \mathrm{nGy_{air}\ s^{-1}}\) versus \(5500\ \mathrm{nGy_{air}\ s^{-1}}\), meeting general medical-imaging requirements.[11](https://doi.org/10.1002/eom2.12064) The 2017 sintered MAPbI3 wafers reached \(2{,}527\ \mu\mathrm{C\ Gy_{air}^{-1}\ cm^{-2}}\) under 70 kVp exposure, benchmarked as competitive with state-of-the-art CdTe detectors.[9](https://www.nature.com/articles/nphoton.2017.94) The most studied perovskite detector materials (MAPbI3, MAPbBr3, CsPbBr3) show mobility–lifetime products around \(10^{-2}\ \mathrm{cm^{2}\ V^{-1}}\), resistivity around \(10^{9}\ \Omega\cdot\mathrm{cm}\), detection limits below \(100\ \mathrm{nGy\ s^{-1}}\), and sensitivities above \(10{,}000\ \mu\mathrm{C\ Gy^{-1}\ cm^{-2}}\); as scintillators, halide perovskites reach light yields as high as 64,000 photons/MeV at room temperature.[8](https://pubs.acs.org/doi/full/10.1021/acsenergylett.0c02430)
## Recent developments
After 2023 the group produced a steady stream of output: a 2024 review of halide perovskite nanocrystals for indirect X-ray detection, 2024 work on blade-coated cesium-formamidinium perovskite solar modules and on perovskite micro-crystal lasers, and 2025 papers on [boosting epitaxial perovskite microstructures by surface passivation and on defect-tolerant semiconductors for photovoltaics, followed by a 2026 study of conformational rearrangement in the layered perovskite BA2PbI4.[2](https://cris.fau.de/persons/101486134/publications) The group also spun off a company: Amperial Windows Technologies was founded in 2023 by a group member, with support from an Exist Gründerstipendium, building on a "Smart Windows" project.[1](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/) The wider field has moved toward lead-free and self-powered detectors, with a 2025 *Chemical Science* study demonstrating a lead-free perovskite ferroelectric, [H2mdap]BiBr5, reaching a sensitivity of 79.0 µC Gy−1 cm−2 under 22 keV X-rays and a detection limit of 28 nGy s−1 at zero bias, below the regular medical diagnosis dose of about 5.5 µGy s−1.[12](https://pubs.rsc.org/en/content/articlelanding/2025/sc/d4sc06049k)
## References
1. [Prof. Dr. Wolfgang Heiß – i-MEET, FAU Erlangen-Nürnberg](https://www.i-meet.tf.fau.de/people/prof-dr-wolfgang-heiss/)
2. [Prof. Dr. Wolfgang Heiß – FAU CRIS publications](https://cris.fau.de/persons/101486134/publications)
3. [Detection of X-ray photons by solution-processed organic-inorganic perovskites (Nature Photonics, 2015)](https://d.docksci.com/download/detection-of-x-ray-photons-by-solution-processed-organic-inorganic-perovskites_59f05e1bd64ab2686224ce89.html)
4. [Development and improvement of novel electro-optical nano-devices based on lead-chalcogenides – JKU Research Portal](https://research.jku.at/en/projects/development-and-improvement-of-novel-electro-optical-nano-devices/)
5. [PbS nanocrystal based photovoltaics – JKU Research Portal](https://research.jku.at/en/activities/pbs-nanocrystal-based-photovoltaics-for-infrared-imaging-and-sola/)
6. [Lead Halide Perovskite Nanocrystals: From Discovery to Self-assembly and Applications (CHIMIA, 2017)](https://www.chimia.ch/chimia/article/download/2017_461/952/11607)
7. [Perovskites target X-ray detection (Nature Photonics, 2016)](https://www.nature.com/articles/nphoton.2016.54)
8. [Metal Halide Perovskites for X-ray Imaging Scintillators and Detectors (ACS Energy Letters)](https://pubs.acs.org/doi/full/10.1021/acsenergylett.0c02430)
9. [High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers (Nature Photonics, 2017)](https://www.nature.com/articles/nphoton.2017.94)
10. [Halide perovskites for sensitive, stable and scalable X-ray detection and imaging (Chemical Communications, 2023)](https://pubs.rsc.org/en/content/articlehtml/2023/cc/d3cc00969f)
11. [Halide perovskites: A dark horse for direct X-ray imaging](https://doi.org/10.1002/eom2.12064)
12. [Stable self-powered X-ray detection with a lead-free halide hybrid perovskite ferroelectric crystal (Chemical Science, 2025)](https://pubs.rsc.org/en/content/articlelanding/2025/sc/d4sc06049k)
---
*Topic: Encyclopedia › Physical world and mathematics › Physical and mathematical scientists › Chemists › Researchers in polymer, supramolecular, and materials chemistry › Colloidal and inorganic nanomaterials*
*Initially written Sep 21, 2026 · Reviewed: Sep 25, 2026; Sep 30, 2026 · Edited: Sep 25, 2026; Oct 11, 2026; Oct 15, 2026 · Last review: Sep 30, 2026*
*Copyright 2026 EdgeChat AI, a subsidiary of Biostate AI.*
License: Edgepedia Community License 1.0, https://www.edgepedia.org/edgepedia/license