193 articles
Active clamp
An active clamp is a power electronics circuit technique that replaces the lossy RCD clamp with a switch and capacitor, recycling leakage energy for higher efficiency.
Active filter
An active filter is an electronic filter built from operational amplifiers, resistors, and capacitors, avoiding bulky inductors at low frequencies, introduced by Sallen and Key in 1955.
Adaptive beamforming
Adaptive beamforming is a signal processing method in which an antenna array updates its element weights in real time, steering gain toward desired signals and nulling interference.
Adaptive body biasing
Adaptive body biasing (ABB) is a circuit technique that dynamically adjusts transistor body voltage to compensate for process, voltage, and temperature variation, aging, and workload changes in CMOS chips.
Adaptive noise cancelling
Adaptive noise cancelling (ANC): signal estimation method using a primary corrupted input plus a noise-correlated reference that is adaptively filtered and subtracted; introduced by Widrow et al. (1975), with LMS/RLS algorithms, notch-like tracking of periodic interference, and ECG, speech, and antenna applications.
Adaptive notch filter
An adaptive notch filter (ANF) is a digital filter that automatically moves its narrow rejection band to track and suppress a drifting interference tone, such as powerline hum in ECG recordings.
Affine projection algorithm
The affine projection algorithm is an adaptive filtering algorithm, introduced by Ozeki and Umeda in 1984, that converges faster than LMS and is widely used in echo cancellation.
Amplifier
An amplifier, also called an electronic amplifier, is a circuit that uses an external power supply to produce an output signal that is a larger replica of its input.
Analog multiplier
An analog multiplier is an electronic circuit or integrated circuit whose output is proportional to the product of two inputs, used in modulation, mixing, division, and power measurement.
Analog signal
An analog signal is a signal that is continuous in both amplitude and time, such as speech or sensor outputs; converting it to digital requires sampling and quantization.
Arbitrary waveform generator
An arbitrary waveform generator (AWG) is an electronic instrument that produces user-defined waveforms by converting stored digital samples to analog voltages, used to test 5G, radar, and quantum systems.
Asynchronous design
Asynchronous design is a digital circuit design style that replaces the global clock with local request-acknowledge handshaking, saving power and demonstrated by the Amulet ARM processors at the University of Manchester.
Audio power amplifier
An audio power amplifier, or power amp, is an electronic amplifier that boosts low-level audio signals enough to drive loudspeakers or headphones, ranging from milliwatts to hundreds of watts.
Automatic gain control
Automatic gain control (AGC), or automatic volume control, is a feedback circuit or algorithm that adjusts amplifier gain to hold output level stable despite varying input strength.
Automatic test pattern generation
Automatic test pattern generation (ATPG) is the process by which a program computes test vectors for detecting faults in digital circuits, so manufactured devices can be screened.
Background calibration
Background calibration is an analog circuit design technique that continuously corrects errors in an analog-to-digital converter during normal operation, tracking drift with temperature, supply voltage, and aging.
Band-pass filter
A band-pass filter is a filter that passes signals with frequencies inside a chosen band and attenuates those below and above it, used in radio tuning and communications receivers.
Band-stop filter
A band-stop filter, also called a band-reject or band-elimination filter, attenuates frequencies in a stopband between two cutoff frequencies while passing all others; a narrow version is a notch filter.
Bandgap voltage reference
A bandgap voltage reference is an analog circuit that sums a PTAT voltage with a base-emitter voltage to yield an output near 1.2 V, nearly independent of temperature.
Biasing
Biasing is the application of DC voltages to a transistor, diode, or vacuum tube to set a DC operating point, or Q-point, so the output signal is undistorted.
Biquad filter
A biquad filter is a second-order filter whose transfer function is a ratio of two quadratic polynomials, used in analog circuits and digital audio processing.
Block-matching algorithm
A block-matching algorithm is a motion estimation method for video that divides frames into blocks, searches a reference frame for the best match, and records motion vectors.
Bode plot
A Bode plot, or Bode diagram, is a pair of graphs showing the magnitude and phase of a system's frequency response, named for engineer Hendrik Wade Bode.
Boost converter
A boost converter, also called a step-up converter, is a DC-DC switching converter that produces a higher output voltage than its input, commonly used for power factor correction.
Breadboard
A breadboard, properly called a solderless breadboard, is a reusable plastic board with spring-clip sockets for building and testing circuits without soldering, common in electronics prototyping.
Buck–boost converter
A buck–boost converter is a switched-mode DC-to-DC converter whose regulated output can be higher or lower than its input, used in battery-powered, automotive, and telecom supplies.
Buffer amplifier
A buffer amplifier, also called a unity gain buffer, transfers a signal between a high-impedance source and a low-impedance load without amplifying voltage, commonly built as an op amp voltage follower or emitter follower.
CAN bus
CAN bus, or Controller Area Network, is a serial bus protocol developed by Bosch, introduced in 1986, that lets automotive electronic control units exchange prioritized messages over a shared two-wire line.
Capacitive coupling
Capacitive coupling, also called AC coupling or electrostatic coupling, transfers signals between circuits through an electric field, used for isolation and touch sensing but causing crosstalk.
Capacitor discharge ignition
Capacitor discharge ignition (CDI) is an ignition system that stores spark energy in a capacitor charged to a few hundred volts, common in motorcycles, scooters, and small engines.