193 articles
Differential amplifier
A differential amplifier, or difference amplifier, is an electronic amplifier that amplifies the voltage difference between two inputs while rejecting voltage common to both, measured by its common-mode rejection ratio.
Differential pulse-code modulation
Differential pulse-code modulation (DPCM) is a signal coding method that transmits the difference between each sample and a prediction from past samples instead of the sample itself.
Differential signaling
Differential signaling is an electrical technique that carries information as the voltage difference between a pair of conductors, so noise appearing equally on both wires cancels.
Digital electronics
Digital electronics, also called digital circuits, is the branch of electronics that represents information with discrete binary values and processes it with logic gates and memory.
Digital phase-locked loop
A digital phase-locked loop (DPLL) is a digitally implemented phase-locked loop in which a numerically controlled oscillator tracks a received signal's phase and frequency for carrier and clock recovery.
Digital-to-analog converter
A digital-to-analog converter, also known as a DAC or D-to-A, is a device that converts digital codes into an analog voltage or current proportional to each code's numeric value.
Diode modeling
Diode modeling is the circuit-analysis practice of representing a diode's current–voltage behavior, charge storage, and breakdown with a compact set of equations, notably the Shockley equation, that SPICE-type simulators solve.
Discontinuous PWM
Discontinuous PWM, also called bus-clamping PWM, is a pulse-width modulation strategy for three-phase voltage-source inverters in which each leg periodically stops switching to cut switching losses.
Dual active bridge converter
The dual active bridge converter is an isolated, bidirectional DC-DC converter in which the phase shift between two H-bridges controls power flow, introduced in 1988.
Duty cycle
Duty cycle, also called duty ratio or duty factor, is the fraction of a repetitive pulse waveform's period during which the signal is active, usually as a percentage.
Electrical network
An electrical network, also called an electric circuit, is a system of elements and nodes in which every element terminal connects to a node, analyzed through Kirchhoff's rules.
Electronic circuit
An electronic circuit is a closed loop of interconnected components, from a battery and lamp to integrated circuits with billions of transistors, that amplifies, computes, or transfers power.
Electronic filter
An electronic filter is a circuit that separates a wanted band of frequencies from unwanted ones, implemented passively, actively, or digitally for uses from radio receivers to digitization.
Electronic oscillator
An electronic oscillator is a circuit that generates a repeating signal, using an amplifier with frequency-selective feedback; common designs include Hartley, Colpitts, Pierce, Wien bridge, ring, and LC oscillators.
Emitter-coupled logic
Emitter-coupled logic (ECL), also called current-mode logic, is a very high speed digital logic family in which transistors steer a constant current and never saturate, developed at IBM in the late 1950s.
Envelope detection
Envelope detection is a signal processing method that extracts the amplitude outline of a signal, by Hilbert transform or rectification with low-pass filtering, used in AM demodulation and ultrasound imaging.
Envelope detector
An envelope detector is an electronic circuit, usually a diode rectifier followed by an RC filter, that recovers the envelope of a high-frequency signal, most commonly to demodulate AM broadcasts.
Equivalent circuit model
An equivalent circuit model represents the electrical behavior of a real device, such as a battery, by a network of ideal resistors, capacitors, and inductors.
Feedback loop
A feedback loop is a closed signal path in which a system's output is measured and fed back to shape its behavior, enabling self-correction, oscillation, amplification, and homeostasis in circuits, machines, organisms, and software.
Filter design
Filter design is the process of turning a frequency-response specification into a working filter: a transfer function and coefficients for a digital filter, or a circuit topology for an analog one.
Finite impulse response
A finite impulse response (FIR) filter is a digital filter that computes each output as a weighted sum of current and past input samples, with no feedback.
Flyback converter
A flyback converter is an isolated switching power supply, structurally a buck-boost with its inductor split to form a transformer, providing galvanically isolated output above or below the input.
Flyback diode
A flyback diode, also called a freewheeling diode, is a diode wired in reverse parallel across an inductive load to safely recirculate current at switch-off.
Flyback transformer
A flyback transformer is a gapped coupled inductor that stores energy while the primary switch is on and releases it to the output, providing isolation in low-power supplies.
Flying capacitor converter
The flying capacitor converter, also called the floating-capacitor or capacitor-clamped converter, is a multilevel power-electronic topology introduced in 1992 by T.A. Meynard and H. Foch in Toulouse, France.
Folded cascode
A folded cascode is an amplifier topology in which the cascode transistor is of the opposite type, folding the signal current into a separate branch.
Forward converter
A forward converter is an isolated, buck-derived DC-DC converter that transfers energy through its transformer while the switch is on, typically serving 100 to 300 W loads.
Frequency modulator
A frequency modulator is a circuit or algorithm that varies a carrier wave's frequency in proportion to an input signal, using direct methods, Armstrong's indirect method, or direct digital synthesis.
Frequency synthesis
Frequency synthesis is an electronic design technique that generates signals at desired frequencies from one or more reference oscillators, using phase-locked loops, direct digital synthesis, and related loop-based architectures.
Frequency-locked loop
A frequency-locked loop (FLL) is a feedback control circuit that adjusts a variable-frequency oscillator until its output frequency matches a reference signal, controlling frequency only, not phase.